645208

Silvercrest SDB 2400 A1 - IAN 270676 Manual

21
Zoom out
Zoom in
Previous page
1/27
Next page
18
SDB 2400 A1
GB
Before first use
1) Remove the steam iron from the packaging.
2) Remove all stickers and protective foils from
the steam iron and from sole of the iron.
WARNING –
RISK OF SUFFOCATION!
Plastic bags can be dangerous. To avoid the
risks of asphyxiation, keep plastic bags out of
the reach of babies and toddlers.
3) Fill the water tank with water (See the chapter
"Filling the water tank").
4) Insert the plug into a mains power socket
supplying an electrical current as detailed
on the rating plate.
5) Switch on the iron and set it to temperature
level 9/MAX (see chapter “Operation“).
6) Heat the steam iron up for several minutes at
this highest setting.
7) Activate the steam blast button a couple of
times so that steam comes out of the sole of
the iron.
8) Then iron over a piece of unwanted material
to remove any residues possibly remaining on
the sole of the iron.
9) Press the
TEMP button repeatedly until
you hear a signal, the display lights up red
and indicates OFF.
10) Pull the power plug out of the socket.
Filling the water tank
1) Place the steam iron on the base .
2) Open the cover of the filler opening for the
water tank .
3) Using the measuring beaker 3, fill the water
tank with water to the "MAX" marking, but no
further.
4) Close the cover of the filler opening for the
water tank .
NOTE
If the mains water in your area is rated as hard,
it is recommended that you mix the mains water
with some distilled water. Otherwise, the jets for
the steam blast function could calcify (become
blocked) prematurely.
To extend the optimal steam blast function, mix
mains water with distilled water according to the
table.
Water hardness
Ratio of distilled
water to mains water
very soft/soft 0
medium 1:1
hard 2:1
very hard 3:1
The water hardness level can be queried at your
local water works.
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDB 2400 A1 - IAN 270676 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2400 A1 - IAN 270676 in the language / languages: English, German as an attachment in your email.

The manual is 0,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDB 2400 A1 - IAN 270676

Silvercrest SDB 2400 A1 - IAN 270676 User Manual - English, German, Dutch, Français - 51 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info