645203

Silvercrest SDB 2200 D2 - IAN 273029 Manual

20
Zoom out
Zoom in
Previous page
1/24
Next page
- 17 -
Turning off the steam iron
• Remove the plug from the wall socket.
• Empty the water tank and clean the ironing
sole q.
• Put the steam iron on the appliance base 0
after it has cooled down.
Drip-stop function
With conventional steam irons it can occur that water
drips from the ironing sole q at low temperatures. Ho-
wever, this iron possesses a new equipment characteri-
stic, the DRIP-STOP function. At low temperatures the
iron automatically switches off the steam-blast function.
When this happens, a "CLICK" is heard. You must then
select a suitable temperature using the thermostat 8. As
soon as this is reached, steam production continues.
Automatic switch-off
The iron is equipped with an automatic switch-off. This
stops the iron from heating up.
If the iron is standing on its ironing sole q and has not
been moved for approx. 30 seconds, acoustic warning
signals are heard and the automatic switch-off indicator
lamp 6 flashes. The iron will no longer be heated. To
deactivate the automatic switch-off, pick up the iron and
move it around a little. The automatic switch-off indicator
lamp 6 will go off and the iron will heat up again.
If the iron is standing on its base 0 and has not been
moved for approx. 8 minutes, acoustic warning signals
are heard and the automatic switch-off indicator lamp
6 flashes. The iron is no longer heated. To deactivate
the automatic switch-off, pick up the iron and move it
around a little. The automatic switch-off indicator lamp
6 will go off and the iron will heat up again.
Note:
The automatic switch-off is not a substitute for unplug-
ging the apparatus from the power supply! It is only in-
tended for reducing the risk of fire if the iron is acciden-
tally left on!
Cleaning
Self-cleaning function
• Fill the water tank to the "MAX" marking.
• Insert the plug into a wall socket.
• Move the thermostat 8 to the "MAX" position.
• Adjust the steam regulator 3 to maximum steam po-
wer.
• Allow the steam iron to heat up until the temperature
control lamp 7 switches off and once again glows.
• Hold the steam iron horizontally over a catchment
receptacle.
• Press and hold down the self-clean button w. Move
the steam iron back and forth a little.
Steam and boiling water flows from the steam exit
holes in the ironing sole q.
Impurities that may be present are washed out.
• Release the self-clean button w as soon as all
of the water has exited.
• Thoroughly dry the ironing sole q. For this, slide the
ironing sole q back and forth over a hand towel or
an old piece of material several times.
• Allow the steam iron to cool down before placing it
in storage.
IB_273029_SDB2200D2_LB1.qxp 26.08.2015 11:13 Uhr Seite 17
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDB 2200 D2 - IAN 273029 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 2200 D2 - IAN 273029 in the language / languages: English, German as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SDB 2200 D2 - IAN 273029

Silvercrest SDB 2200 D2 - IAN 273029 User Manual - Dutch, Danish, French - 53 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info