754156

Silvercrest SDB 1500 A1 - IAN 114903 Manual

11
Zoom out
Zoom in
Previous page
1/57
Next page
11 GB/IE
Start-up / Cleaning and Maintenance
Press the handle 15 downwards vertically until
it clicks into place (Fig. M).
Place the motor body 2 in an upright position
(Fig. N).
ATTENTION! The hinge between the steam
base 9 and motor body 2 must click into
place to ensure that the device can stand
upright in a stable fashion.
Cleaning and Maintenance
ATTENTION! Unplug the mains plug 4 from
the socket before cleaning the device. Allow
the device to cool for several minutes before
cleaning.
ATTENTION! Never immerse the device in
water or other liquids! Risk of electric shock/
short circuit.
ATTENTION! Check the condition of the
mains cable 4 after each use. If this should
become damaged, take it to an appropriate
service centre to be replaced by a specialist.
Do not use any abrasives and/or solvents for
cleaning the device as this could damage the
plastic parts.
Do not fill any vinegar, descaling agents or
other perfumed substances into the tank. Doing
so will void the guarantee.
Clean the plastic parts on the device with a
damp, non-abrasive cloth and dry it with a dry,
non-abrasive cloth.
Rinse out the water tank from time to time with
fresh water and empty it thereafter.
Wash the washable pad 8 as per the instruc-
tions on the label.
Remove the dust container 6 regularly and
empty it (fig. O). Remove the brush protector 7
by unhooking this from the bottom of the
device and pulling it upwards (fig. P). Clean the
turbo brush 18 by removing the dust accumu-
lated (Fig. Q). Reattach the brush protector 7
by hooking it onto the corresponding notches
on the underside of the device and clicking it
into place on the top of the device.
Keep the device in a cool, dry location and out
of the reach of children.
We recommend that you keep the original
packaging in a safe place. The manufacturer
accepts no liability for damage which occurs
through sending in the item to customer ser-
vices in the incorrect packaging.
Replacing the filter
Note: The filter 10 must be replaced every
4–6 months or 100 cleaning cycles (one cycle
denotes use of a full water tank).
Remove the mains plug 4 from the socket
when doing so.
Wait until the hot parts have cooled.
Remove the water tank 11 .
Remove the filter 10 by lifting it upward paral-
lel to the motor body 2.
Replace the filter with a new one and check
that it is seated correctly (Fig. R).
Put the water tank 11 back in place.
Troubleshooting
ATTENTION! In cases of malfunction and
electrical damage, turn the device off immedi-
ately. Unplug the mains plug 4 from the
socket and wait until the device has cooled.
114903_silv_Dampfbesen SDB 1500 A1_content_FI_NL.indd 11 11.06.15 17:08
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SDB 1500 A1 - IAN 114903 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SDB 1500 A1 - IAN 114903 in the language / languages: English, German, Dutch, Swedish, Finnish as an attachment in your email.

The manual is 2,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info