740026

Silvercrest SCM 1500 A1 IAN 90844 Manual

59
Zoom out
Zoom in
Previous page
1/66
Next page
SCM 1500 A1 57
During operation, the green indicator 5
(and thus the heater) will continually turn
on and off. This serves to maintain as
constant a temperature as possible.
9. Leave the appliance switched on for
around 10 – 15 minutes.
10. Remove the power supply plug and allow
the appliance to cool down.
11. Clean the appliance again. Take note of
the relevant information in the section
entitled “7. Cleaning and storage” on
page 58.
Note: The first crêpes you make should be
thrown away, not eaten, as they will not taste
right.
6. Making crêpes
1. Place the appliance on a surface that is
firm, level and non-flammable. Maintain
a distance of approx. 50 cm from other
objects.
2. Unwind the mains cable completely.
3. Place the baking plate 1 on the bottom
section 2.
4. Wipe off any dust with a dry cloth.
5. Insert the power supply plug into a suita-
ble mains socket..
The red indicator 3 comes on to show
that the appliance is connected to the
power supply.
6. Turn the temperature control 4 to the
desired setting.
As soon as operating temperature has
been reached, the green indicator 5
comes on.
Note: You can control the browning of
the crêpes by altering the temperature
and cooking time. We recommend
setting the temperature control 4 to
between "2" and "MAX".
During operation, the green indicator 5
(and thus the heater) will continually turn
on and off. This serves to maintain as
constant a temperature as possible.
7. Apply a little crêpe batter to the baking
plate 1.
Note: Using a ladle, apply enough
batter to cover 2/3 of the baking plate
1. If you want thinner or thicker crêpes,
pour a little less or more batter onto the
baking plate 1.
Caution! Take care to ensure that the
batter does not flow over the edge of the
baking plate.
8. Dip the batter spreader 6 in water.
Note: Before making each new crêpe,
dip the batter spreader 6 in water. This
makes it easier to spread the batter
without it sticking to the spreader 6.
9. Using the spreader 6, spread the batter
evenly over the baking plate 1.
To do this, place the spreader on the
surface of the batter without applying
pressure and, using a circular motion,
spread the batter outwards so that it
evenly covers the baking plate 1.
10.After 30 to 60 seconds (depending on
the temperature and how brown you
want the crêpe to be), flip the crêpe
using the crêpe flipper 7.
11. After another 30 to 60 seconds, lift the
finished crêpe off the baking plate 1
using the crêpe flipper 7.
12.Place the crêpe on a plate and add the
topping of your choice.
RP90844 Crepes-Maker LB1 Seite 57 Mittwoch, 12. Juni 2013 7:15 19
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SCM 1500 A1 IAN 90844 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SCM 1500 A1 IAN 90844 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info