739827

Silvercrest SBW 1000 A2 IAN 78948 Manual

26
Zoom out
Zoom in
Previous page
1/28
Next page
- 24 -
Note:
It can happen that, during the baking process, the green
operating lamp
q
goes out briefly and then lights up
again. This indicates that the adjusted temperature
had fallen, causing the appliance to automatically
heat itself back up to the programmed temperature.
• The waffles are ready after about 3 minutes.
You can determine the level of browning either
by adjustment of the temperature regulator
e
or by means of the baking time. In this way, the
waffles can be baked to a golden yellow or a
crispy brown. The given baking time is only a
guide.
The baking time is dependant on, ...
... how the batter has been constituted.
... whether you prefer your waffles light in clour or a
crispy brown.
... if you are baking one or two waffles at the same
time.
... to which level the browning regulator
e
is set.
6. Open the waffle iron to check if the waffles are
sufficiently baked resp. brown. If the waffles are
not yet ready, reclose the waffle iron and let
them bake for a little longer.
7. Open the waffle iron and take the waffles out.
Note:
When removing the waffles, be sure not to accidentally
damage the coating of the baking surfaces.
To avoid this, use only wooden or heat-resistant plastic
implements.
8. After baking the last waffle, remove the plug
from the mains power socket and allow the
appliance to cool down, with the lid up.
Cleaning and care
To avoid potentially fatal electric
shocks:
Never open the appliance housing. There are
no user-serviceable elements inside. When the
casing is open, there is the risk of receiving a fatal
electrical shock.
- Before commencing with the cleaning of the ap-
pliance, remove the plug from the mains power
socket and allow the appliance to cool down.
Never submerse any parts of the appliance in
water or other liquids! This would bring about
the risk of a potentially fatal electric shock upon
the next use of the appliance should moisture be
present in the voltage conducting elements.
• First of all, clean the baking surfaces with a dry
paper towel to soak up any grease residue.
• Then clean all surfaces and the power cable
with a lightly moistened dish cloth. Always dry
the appliance well before using it again.
Caution!
Do not use cleaners or solvents.
These can damage the surface of the appliance. Re-
sidues from these cleaning agents could possibly
find their way into the next few waffles and thus
lead to personal injury!
In the case of stubborn residues:
Caution! Property damage!
NEVER make use of hard objects. These could da-
mage the coatings of the baking surfaces.
• It is better to lay a wet wash cloth on the encrusted
residues in order to soften them.
IB_78948_SBW1000A2_LB2.qxp 15.08.2012 9:13 Uhr Seite 24
… 26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SBW 1000 A2 IAN 78948 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBW 1000 A2 IAN 78948 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info