649230
10
Zoom out
Zoom in
Previous page
1/68
Next page
SBLV 20 A1
GB
IE
 7
NOTE
Check the package for completeness and for signs of visible damage.
If the delivery is incomplete or damage has occurred as a result of defec-
tive packaging or during transport, contact the Service hotline (see section
Service).
Disposal of packaging materials
The packaging protects the device from damage during transport. The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable.
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated. Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations.
NOTE
If possible, keep the device's original packaging during the warranty period
so that the device can be packed properly for return shipment in the event
of a warranty claim.
Set-up location requirements
For safe and trouble-free operation of the device, the set-up location must fulfil
the following requirements:
Place the device on a firm, flat and level surface.
Do not operate the device in a hot, wet, extremely damp or explosive environment.
Keep a minimum distance of 30 cm to heat-emitting appliances such as heaters,
ovens, etc.
Operate the device only in locations with adequate ventilation.
The surfaces of some items of furniture might contain components that can corrode
and soften the rubber feet of the device. If necessary, place a mat under the
device’s rubber feet.
The mains power socket must be easily accessible so that the power cable can
be easily disconnected in an emergency.
Connecting the power supply
Before connecting the device, compare the connection data (voltage and
frequency) on the rating plate with that of your mains power supply. This
data must agree so that the device is not damaged.
Plug one end of the power cable
into the AC
~
socket on the rear of
the device and the mains plug into a mains socket.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SBLV 20 A1 - IAN 273789 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBLV 20 A1 - IAN 273789 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info