649230

Silvercrest SBLV 20 A1 - IAN 273789 Manual

7
Zoom out
Zoom in
Previous page
1/68
Next page
SBLV 20 A1■ 4 
│
 GB
│
IE
■ If the power cable or connections are damaged, have them replaced by an
authorised specialist or the Customer Service department.
■ Protect the power cable from hot surfaces and sharp edges.
■ Ensure that the power cable is not taut or kinked.
■ Do not leave the power cable hanging over edges (tripping hazard).
■ Always place the device on a stable and level surface. It can be damaged if
dropped.
■ Do not expose the device to direct sunlight or high temperatures. Otherwise it
may overheat and be irreparably damaged.
■ Be sure to provide sufficient air circulation to avoid a heat build-up. Never cover
the device! Risk of fire!
■ Do not place the device near heat sources such as radiators or other heat-generating
appliances.
■ Never operate the device in the vicinity of naked flames (e.g. candles), and do
not place burning candles on or next to the device. This will help to prevent fires.
■ The device is not designed for use in rooms with high temperatures or humidity
(e.g. bathrooms) or where there is excessive dust.
■ Do not expose the device to water spray or dripping water, and do not place
liquid-filled objects such as vases or open drink containers on or near the device.
■ The speaker may warm up during charging. Place the speaker in a well-ventilated
location during the charging process and do not cover it.
■
DANGER! Never open the housing of the device. There are no user-serviceable
or replaceable components inside the device. Risk of electrical shock!
■ Do not make any unauthorised modifications or alterations to the device.
■ All repairs must be carried out by authorised specialist companies or by the
Customer Service department. Improper repairs may put the user at risk. It will
also invalidate any warranty claims.
■ Repairs to the device during the warranty period may only be carried out by
a customer service department authorised by the manufacturer. Otherwise, no
warranty claims will be held for any subsequent damages.
■ Defective components must always be replaced with original replacement parts.
Compliance with the safety requirements can only be guaranteed by using these
replacement parts.
■ Switch off the device immediately and pull the plug out of the power socket if
you smell fumes or notice any smoke. Have the device checked by a qualified
specialist before using it again.
■ The device consumes power in standby mode. To completely separate the device
from the power supply, the plug must be disconnected from the mains power
socket. The power socket must be easily accessible so that the mains adapter can
be easily disconnected in an emergency.
■ In the case of a malfunction occurring or a thunderstorm, disconnect the plug
from the mains power socket.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SBLV 20 A1 - IAN 273789 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBLV 20 A1 - IAN 273789 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info