669482
11
Zoom out
Zoom in
Previous page
1/76
Next page
12 GB/IE/NI
Operation / Evaluating ResultsOperation
Important for measurements: the body fat per-
centage can only be determined if you are ba-
refoot. If necessary, slightly moisten the soles of
your feet.
Note: Completely dry or very calloused feet
may provide poor results, as the conductivity
will be too low.
Note: Do not allow the feet, legs, calves or
thighs to touch. This will interfere with measure-
ment.
Note: Wearing socks will provide false results.
Stand upright and still during measurement,
with the weight distributed equally between
both legs.
Please note, only the long-term trend is impor-
tant. Sudden weight changes within a few days
are typically caused by loss of fluids; however,
hydration is important for your well being.
Note: The units of measure for the scales can be
changed in the app, under device settings (kg / lb / st).
Measuring
Step on the diagnostic scales barefoot and be
sure to stand still on the electrodes
5
with the
weight distributed equally between both legs.
The diagnostic scales will start to measure immedi-
ately. They will first show the weight
6
. Whilst
measuring other parameters the display will read
„oooo“.
The results will appear shortly after.
If a user has been assigned (the user initials
14
will
appear, e.g. LEE), BMI, BF, water, muscle, bone,
BMR and AMR will be displayed.
The following information will be displayed:
- Weight
6
in kg with BMI (Fig. C)
- Body fat
13
in % (BF) (Fig. D)
- Body water
13
in % (Fig. E)
- Muscle mass
13
in % (Fig. F)
- Bone mass
13
in kg (Fig. G)
- Basal metabolic rate
8
in kcal (BMR) (Fig. H)
- Active metabolic rate
9
in kcal (AMR) (Fig. I)
If a user is not recognised, only the
weight will be displayed along with „- - -“.
Weight Only
Stand on the diagnostic scales wearing shoes.
Stand still on the diagnostic scales with the
weight distributed evenly between both legs.
The diagnostic scales will start to measure immedi-
ately. The weight will be displayed, and the LC-dis-
play
1
will cycle through „- - - -“.
If a user has been assigned (the user initials
14
will
appear, e.g. LEE), the BMI, BMR and AMR will be
displayed.
If a user is not recognised, only the weight will be
displayed along with „- - -“.
Switching Off the
Diagnostic Scales
The diagnostic scales feature an auto shut-off and
will automatically switch off after displaying the
results.
Configuring Users
The weighing scales are able to save measurements
from up to 8 different users. Upon starting a new
measurement, the diagnostic scales will assign the
measurement automatically to the created user:
- in the case of a measurement of weight only (in-
cluding shoes): to the user whose last saved value
lies within the range of +/- 2 kg of the new
measurement
- in the case of measurement of a diagnosis
(barefoot): to the user whose last saved value lies
within the range of +/- 2 kg or +/- 2% of BF from
the new measurement
If more than one user falls into the same range, the
measurement will be saved as an unknown user.
Unknown Value
If values cannot be matched with a user, the diag-
nostic scales will save these values as unknown val-
ues. The LC-display
1
will read „- - -“ under initials
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SBF 75 - IAN 290987 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBF 75 - IAN 290987 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info