575516
6
Zoom out
Zoom in
Previous page
1/72
Next page
- 4 -
During use, NEVER come into contact with the
rotating kneading paddles. There is also a risk
of personal injury!
Do not pull on the cable to remove the plug,
rather, pull the plug itself from the socket.
When not in use, and before cleaning the
appliance, remove the power cable from the
wall socket.
Do not use the Bread Baking Machine for the
storage of foods or utensils.
Never lay aluminium foil or other metallic
objects in the Bread Baking Machine. This
could lead to a short circuit. There would be a
risk of fire!
Never place the bread machine in water or
other liquids. Risk of fatal electrical shocks!
Do not clean the appliance with abrasive sponge
cleaning pads.
Should particles break away from the sponge
and come into contact with electrical compo-
nents, you could receive an electric shock.
Do not use an external timing switch or a separate
remote control system to operate the appliance.
Never use the appliance without a baking mould
or with an empty one. This would
irreparably damage the appliance.
Always close the lid during operation.
NEVER remove the baking mould during
operation.
When baking, NEVER exceed the amount of
700 g of flour and NEVER add more than
1 1/4 packets of dry yeast. The dough could
overflow and cause a fire!
When in use, the temperature of the outer
surfaces and the door can be very high. Risk
of Burns!
Caution! Hot surfaces!
Parts of the appliance become very hot
during operation! Risk of burns!
Before the first usage
Disposal of the packaging material
Unpack your appliance and dispose of the packaging
material in accordance with your local regulations.
Initial cleaning
Wipe the baking mould , kneading paddles ²
and outer surfaces of the bread baking machine
with a clean, damp cloth before putting it into opera-
tion. Do not use abrasive scrubbers or cleaning
powders. Remove the protective foil on the control
panel .
Pre-heating
Please take note of the following notice
regarding the first usage:
For the first heating up ONLY, place the empty baking
mould into the appliance. Close the appliance
lid . Select the programme 12, as described in
the section "PROGRAMMES“ then press the button
Start/Stop , to warm up the appliance for 5 mi-
nutes. To terminate the programme, after 5 minutes
press the button Start/Stop until a long signal
tone is heard.
As the heating elements are lightly greased, a slight
smell may occur when first putting the appliance
into operation. This is harmless and stops after a
short time. Provide for sufficient ventilation, for
example, open a window.
Allow the appliance to cool down completely and
once again wipe the baking mould , kneading
paddles and the outer surfaces of the Bread
Baking Machine with a clean moist cloth.
ƽ Risk of fire! Do not allow the Bread Baking
Machine to warm up for more than 5 minutes
with an empty baking mould . There is a
real danger of overheating.
IB_73485_SBB850EDSA1_LB6.qxp 29.03.2012 17:42 Uhr Seite 4
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SBB 850 EDS A1 - IAN 73485 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBB 850 EDS A1 - IAN 73485 in the language / languages: English, German as an attachment in your email.

The manual is 2,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SBB 850 EDS A1 - IAN 73485

Silvercrest SBB 850 EDS A1 - IAN 73485 User Manual - English, German, Dutch - 66 pages

Silvercrest SBB 850 EDS A1 - IAN 73485 User Manual - French - 66 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info