646204

Silvercrest SBB 850 B1 - IAN 274313 Manual

15
Zoom out
Zoom in
Previous page
1/112
Next page
SBB 850 B1
■ 12 
│
 GB
│
IE
You can monitor the programme sequence through
the viewing window 1 of your bread maker.
Occasionally, condensation may build up on the
viewing window 1 during baking. The appliance
lid 2 may be opened during the kneading phase.
NOTE
► Do not open the appliance lid 2 during the
rising or baking phases. The br
ead could
collapse.
Ending a programme
When the baking process has been completed,
you will hear ten beeps and the display indicates
0:00. At the end of the programme, the appliance
automatically changes to a keep-warm mode for
up to 60 minutes.
NOTE
► This does not apply to programmes 6, 7 and
11.
In this mode, w
arm air circulates inside the appli-
ance. The keep-warm function can be ended early
by keeping the Start/Stop button pressed until
a beep is heard.
DANGER! ELECTRIC SHOCK!
► Before opening the appliance lid 2, discon-
nect the po
wer plug from the socket. The
appliance should always be disconnected
from the power grid when not in use!
Taking out the bread
Always use pot holders or oven gloves when re-
moving the hot baking mould 7. Hold the baking
mould 7 tilted over a grill tray and shake it lightly
until the bread slides out of the baking mould 7.
If you haven't already removed the kneading hooks:
If the bread does not slip off the kneading blades 6,
carefully remove the kneading blades 6 using the
supplied kneading blade remover 0.
NOTE
Do not use any metal objects that could cause
scr
atches on the non-stick coating. Rinse the
baking mould 7 with warm water directly after
removing the bread. This will help prevent the
kneading blades 6 becoming stuck on the drive
shafts.
■ Press the Start/Stop button briefl
y to pause
the programme at the very start of the baking
phase or, pull the power plug out of the socket.
Ensure that you replace the power plug within
10 minutes so that the baking process can be
continued.
■ Open the appliance lid 2 and r
emove the
baking mould 7. With fl oured hands, you can
remove the dough and then pull out the knead-
ing blades 6.
■ Replace the dough in the back baking mould 7.
Replace the baking mould 7 and close the
appliance lid 2.
■ Put the power plug into the socket if necessary.
The baking program continues from where it
was stopped.
Allow the bread to cool for 15–30 minutes before
eating it.
Before cutting the bread, always check to ensure
that the kneading blades 6 have been removed
from it.
Error messages
■ If the display sho
ws "HHH" after the pro-
gramme has been started, it indicates that the
temperature in the bread maker is still too high.
Stop the programme and remove the power
plug. Open the appliance lid 2 and allow the
machine to cool down for 20 minutes before
reusing it.
IB_274313_SBB850B1_DK_BE_NL.indb 12 18.02.16 08:20
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SBB 850 B1 - IAN 274313 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SBB 850 B1 - IAN 274313 in the language / languages: Dutch, Danish as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SBB 850 B1 - IAN 274313

Silvercrest SBB 850 B1 - IAN 274313 User Manual - English, German, French, Italian - 90 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info