Manual Silvercrest SAS 7.2 A2 IAN 79406 (page 40 of 43) (English, German, Dutch, French, Italian)

739858

Zoom out

Zoom in

1/43

- 37 -

Charging

Note:

Check to ensure that the on/off switch 6 has been

slid back (to the position "0") before starting the

charging process.

• Place the hand vacuum cleaner from above into

the wall holder 3 so that the barrel plug 5 slips

into the socket on the hand vacuum cleaner.

The charge indicator lamp 7 glows red and the

charging process begins.

Important!

• When the hand vacuum again has enough ener-

gy to vacuum, the charge indicator lamp 7

glows green. This does not mean that the batte-

ries are fully charged. When the charge indica-

tor lamp 7 glows green, it means the batteries

are charged to about 80%.

• When the charging process is complete, which

may take 12 to 15 hours for completely dis-

charged batteries, the device switches over to a

trickle charge (maintenance function) automati-

cally. Nevertheless, in order to avoid possible

damage to the batteries, do not leave the appli-

ance permanently connected to the power

adapter 4.

• Reconnect the appliance with the power adap-

ter 4 when the suction power has become

noticeably weaker.

Note:

The hand vacuum cleaner can also be charged

directly via the power adapter 4. For this, remove

the barrel plug 5 with a slight twist from the wall

holder 3 and insert it into the socket on the hand

vacuum cleaner.

Operation

Warning!

The suction opening must always be open and

unblocked. Blockages lead to overheating and da-

mage to the motor.

Tips:

• Make certain that the dust filter 9 is always

inserted before using the appliance.

• As the maximum, suck up only as much liquid as

will fill the dirt container 0 to the MAX mark.

1. Take the hand vacuum cleaner from the wall hol-

der 3 or, if you do not use the wall holder 3,

remove the barrel plug 5 from the socket.

2. If required, place the appropriate nozzle into the

suction opening:

• the crevice nozzle 2, to clean narrow and

difficult to reach locations.

• the wet suction nozzle 1 to vacuum liquids up.

Note:

After you have vacuumed up liquids, immediately

clean the dirt container 0. Otherwise bacteria and

microbes could form in it! Ensure that the dust filter

9/the dust filter bag is completely dry before using

the appliance again.

3. To switch the appliance on, slide the on/off

switch 6 forwards.

4. When you have finished using it, slide the on/

off switch 6 to the rear.

Note:

Place the hand vacuum in the wall holder 3 and

start the charging process when the vacuum power

has become noticeably weaker.

IB_79406_SAS72A2_LB1.qxp 31.10.2012 10:40 Uhr Seite 37

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SAS 7.2 A2 IAN 79406 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest SAS 7.2 A2 IAN 79406 Manual

Product: