575513
34
Zoom out
Zoom in
Previous page
1/45
Next page
34 GB/MT
Cleaning and maintenance
©
Cleaning and maintenance
©
Cleaning
Important safety advice for
cleaning the slicer
1. Before starting to clean the electric Multi-Pur-
pose Slicer; switch it off, remove the power ca-
ble
8
from the mains socket and set the food
support plate
13
into the „0“ setting.
2. Do not submerse the electric Multi-Purpose
Slicer in water.
3.
ATTENTION! RISK OF SERIOUS
INJURY: The cutting blade
12
is very sharp!
Accessories suitable
for dishwashers!
˽ Clean the food carriage
10
, the food holder
11
and the catch-tray
17
in the dishwasher.
˽ It is necessary to clean the electric Multi-Pur-
pose Slicer thoroughly at regular intervals as
perishable food scraps could accumulate on
the appliance or behind the cutting blade
12
.
˽ Clean all appliance parts not suitable for the
dishwasher with a lightly moistened cloth.
Wipe off the appliance housing
5
, the cutting
blade covering
6
, the support table with
guide slots
9
and the food support plate
13
carefully. Do not use abrasive cleaning agents,
sponges with rough surfaces or hard brushes.
Cleaning brush:
ATTENTION! RISK OF PERSONAL INJU-
RY! Carry out all tasks using the cleaning brush
19
with great care. Should it slip close to the
cutting blade
12
, there is the risk of receiving a
severe personal injury.
˽ Use the bristles of the cleaning brush
19
to re-
move remnants such as crumbs from all difficult
to reach positions. The flattened end can be
excellently used to remove stubborn soiling.
©
Maintenance / Removing /
assembling the cutting blade
Important safety notices for
the removal and assembly of
the cutting blade!
1. Switch the slicer off, remove the plug from the
power socket and set the food support plate
13
into position „0“.
2.
ATTENTION! RISK OF PERSONAL
INJURY! The cutting blade
12
is very sharp!
For the removal and assembly wear appropriate
safety gloves. Otherwise, you could receive cut
injuries.
˽ Open the blade cover
6
by pressing the
blade cover unlock button
4
. Remove the
blade cover
6
.
˽ Remove the plastic screw clip
18
from the
mounting and screw the blade lock of the cut-
ting blade
12
out by unscrewing it to the left.
˽ When taking out the blade
12
make sure that
you grasp it at its centre.
˽ The cutting blade
12
can be cleaned in the
dishwasher.
˽ Clean the housing behind the cuttingblade
12
with a dry cloth or a soft brush.
˽ Re-assemble the cutting blade
12
in a reverse
sequence of the above instructions.
˽ Due to the special sawtoothing and the high
quality, the cutting blade
12
will retain its
sharpness for a very long time. A resharpening
of the cutting blade is not necessary. Consult
the service centre for your country if you have
questions about the cutting blade
12
.
©
Special accessories
Round cutter:
An untoothed cutting blade, specifically for the
finest of slices, is also available.
Orders for special accessories are be directed to
the service centre for your country.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SAS 150 A1 - IAN 46298 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SAS 150 A1 - IAN 46298 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SAS 150 A1 - IAN 46298

Silvercrest SAS 150 A1 - IAN 46298 User Manual - German, Dutch - 36 pages

Silvercrest SAS 150 A1 - IAN 46298 User Manual - Dutch - 9 pages

Silvercrest SAS 150 A1 - IAN 46298 User Manual - French, Italian - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info