576599
9
Zoom out
Zoom in
Previous page
1/44
Next page
6
SABD 3.6 Li A1
GB
IE
5) Remove any dirt (on both sides of the brush
bristles) and clean the rotary brush 9.
Replace the rotary brush 9.
1) Push one side of the rotary brush 9 onto the
drive shaft q.
2) Push the square end of the rotary brush 9 into
the housing so that the rotary brush 9 sits
straight in the housing again.
3) Replace the cover on the housing and push
the catch 0 back so that the cover sits fi rmly
in place.
Storage
ATTENTION! MATERIAL DAMAGE!
Ensure that the appliance is switched off
before putting it away. Otherwise the battery
could be damaged by excessive discharging.
Store the cleaned appliance in a clean, dust-free
and dry place.
Troubleshooting
The appliance will not start.
The battery is discharged. Recharge the appliance.
The appliance is defective. Contact Customer
Service.
The rotary brush 9 generates loud noises
when revolving.
The rotary brush 9 is soiled. Clean the rotary
brush 9.
The rotary brush 9 is not inserted properly.
Check whether the rotary brush 9 is correctly
tted and correct the fi tting if required.
Warranty and service
You are provided a 3-year warranty on this
appliance, valid from the date of purchase.
This appliance has been manufactured with care
and inspected meticulously prior to delivery.
Please retain your receipt as proof of purchase.
In the event of a warranty claim, please contact
your Customer Service unit by telephone. This is the
only way to guarantee free return of your goods.
The warranty only covers claims for material and
manufacturing defects, not for damage sustained
during carriage, components subject to wear and
tear or damage to fragile components such as
switches or batteries. This appliance is intended
solely for private use and not for commercial
purposes.
The warranty shall be deemed void in the case
of misuse or improper handling, use of force and
interventions which have not been carried out by
one of our authorised Service centres.
Your statutory rights are not restricted by this
warranty.
The warranty period is not prolonged by repairs
eff ected under the warranty. This also applies to
replaced and repaired components. Any damage
and defects present at the time of purchase must be
reported immediately after unpacking, but no later
than two days after the date of purchase. Repairs
eff ected after expiry of the warranty period shall
be subject to charge.
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: kompernass@lidl.co.uk
IAN 100114
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: kompernass@lidl.ie
IAN 100114
Hotline availability:
Monday to Friday 08:00 - 20:00 (CET)
IB_100114_SABD3.6LiA1_DK_BE_NL.indb 6IB_100114_SABD3.6LiA1_DK_BE_NL.indb 6 18.07.14 11:5418.07.14 11:54
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SABD 3.6 Li A1 - IAN 100114 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SABD 3.6 Li A1 - IAN 100114 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info