740025
25
Zoom out
Zoom in
Previous page
1/27
Next page
- 22 -
Working with the floor sweeper
Caution:
Never use the device with the dirt container
removed. The dirt would only be swirled around!
Keep end of rotating brush, wands and other
openings away from your face and body. Risk of
injury!
Press the switch to start the rechargeable bat-
tery floor sweeper. Press again to switch off the
device.
Guide the rechargeable battery floor sweeper
over the floor.
You can leave the broomstick locked in verti-
cal position during work interruptions.
Note:
With some types of carpet the rechargeable battery
floor sweeper could rattle or bounce. In this case
work slowly and in the opposite direction.
Cleaning
Caution:
Do not clean the appliance while charging it. Always
disconnect the battery charger from the mains po-
wer socket before cleaning the appliance!
To clean the housing:
Wipe the housing of the appliance with a damp
cloth. If necessary, use a mild detergent on the
cloth.
Ensure that the appliance is completely dry before
reconnecting it with the battery charger.
How to clean the dirt container:
To maintain the efficiency of the rechargeable
battery floor sweeper, empty the dirt container after
every use.
Press the unlocking locking release button of
the dirt container to detach it from the device.
Remove the dirt container from the appliance
horizontally with a downward movement.
Empty the dirt container and re-insert.
How to clean the brush:
If the brush roller cannot be turned any longer
because of accumulated coarse dirt or threads,
proceed as follows:
Turn over the rechargeable battery floor swee-
per and hold it so that the flat side with the brush
roller faces you.
Remove the small cover on the right-hand
side.
Loosen the drive belt by pushing it to the right.
Lift the brush roller on the right-hand side and
remove the guide attachment with washer .
Now pull the brush roller from the device to the
right-hand side.
Remove the dirt (on both sides of the bristle) and
clean the brush.
After cleaning, proceed as follows to re-install the
brush roller:
Insert the drive belt in the compartment and
place it around the motor drive pulley.
Place the washer on the guide attachment with
washer and insert the brush roller into the left
guide channel.
Pull the drive belt over the guide attachment with
washer and re-insert the brush roller into the
right channel.
Now pull the drive belt over the drive cog of the
brush roller.
Fit the brush cover by first introducing the
lower lugs in the recesses and press the cover
in at the top.
Caution:
Ensure that the device is not inadvertently
switched on with the dirt container removed or
while cleaning the brush. Risk of Injury!
Do not clean the device during the charging
process. Risk of Injury!
IB_89884_SAB48A2_LB2.qxp 10.04.2013 15:24 Uhr Seite 22
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SAB 4.8 A2 IAN 89884 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SAB 4.8 A2 IAN 89884 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info