632861
132
Zoom out
Zoom in
Previous page
1/162
Next page
130
Installation
SAB 160 A1
GB
MT
To connect the device to two speakers use only the cables for the front speakers.
NOTICE
Make sure that a permanent positive connection is applied to the station
memory of connection 4 in the ISO block A.
In some automobile models the standard confi
guration of the connections
[4] and [7] in ISO block A are interchanged at the factory. If this is the
case the station memory can be lost. To correct this, the connections 7
(Ignition positive) and 4 (Permanent positive) in the ISO Block A must be
swapped. For this, insert the supplied adapter cable
51
between the ISO-
Block A
36
of the radio and the vehicle wiring harness. On the adapter
cable
51
, connect the red wire of the ISO connector with the yellow wire of
the ISO socket and the yellow wire of the ISO connector with the red wire
of the ISO socket (see also the rear fold-out side).
You can connect an external amplifi er to the audio cinch output. For this
follow the operating instructions for the external amplifi er.
IMPORTANT
When using the adapter cable for the ISO-Block A
51
, both connections
(red and yellow wires) must be connected with each other. If they are not,
there is the risk of a short circuit!
Antenna power connection
IMPORTANT
Possible damage to the device!
Nev
er burden the connector for the antenna current with the motor power
cable of the antenna or with other consumers.
The connection for the antenna pow
er is available for a relay controlled antenna.
The relay then automatically extends the antenna when the device is switched
on. When switched off the antenna retracts. This connection can also be used to
control an external amplifi er. For exact connection information please consult the
amplifi er’s operating instructions.
Connection of an external amplifi er
For the connection of an external amplifi er use the audio cinch output LINE OUT
40
.
For this follow the operating instructions for the external amplifi er.
Connection of an external subwoofer
For the connection of an external subwoofer use the yellow cinch connector
SUBWOOFER
38
. For this follow the operating instructions for the external
subwoofer.
132


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest SAB 160 A1 - IAN 71024 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest SAB 160 A1 - IAN 71024 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 2,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest SAB 160 A1 - IAN 71024

Silvercrest SAB 160 A1 - IAN 71024 User Manual - German, Dutch, French, Italian - 162 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info