566383

Silvercrest RF-1002 Manual

8
Zoom out
Zoom in
Previous page
1/46
Next page
2
UK
Step 3: Set up your mouse
Information: If you are using Windows98/ME, follow the on-screen instructions after you
have connected and powered on the devices. Under Windows 2000/XP you must wait until
the device has been detected and installed.
Note: This is a must to follow the steps in order to set up your mouse successfully!
1. Press the “ID” button an the top of the receiver.
2. To power on, press the “ID” button located at the bottom of the mouse
3. Move the mouse freely to make sure the connection is ok. Once the connection between
mouse and receiver has been established successfully, the red LED starts blinking quickly.
Your mouse has been successfully configured.
STEP 4: Powering the Mouse Off
In order to the reduce power consumption, you can power off the mouse. To do so, press
and hold the “ID” button on the bottom of your mouse for about 5 seconds.
Note:
1. The products cannot work on highly glossy surfaces and deep dark colour surfaces, such
as mirror, glass, marble surface. It can work on light colour surfaces, such as desktop,
computer table surfaces and so an.
2. The products will go to sleeping mode when you da not operate the product more than
20 minutes, that can reduce the power consumption. You may press any button of the
mouse to arouse it to working status.
Trouble Shooting
The mouse cursor does not move properly.
1. Change the position of your radio receiver, because it may be too far from the mouse or
a large metal object may be interfering with the receiver radio reception. Try moving the
receiver and/or mouse to improve the reception.
2. The interference may occur from other same products at near distance in office or
home, you may change the ID code (see Step 3) several times in order to get optimal
performance.
"ID"
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest RF-1002 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest RF-1002 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Norwegian as an attachment in your email.

The manual is 0,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info