658893
29
Zoom out
Zoom in
Previous page
1/40
Next page
33 GB/MT
Operation / Cleaning and care
Operation
Note: The heating pad may smell of plastic the
first time you use it, but this will disappear after a
short period of time.
Position the heating pad on your back so that the
fastener for the neck section is in the throat area.
Only close the fastener when the pad is
positioned properly.
Then adjust the length of the belt around your
stomach and fit the two ends of the connector
together (see Fig. C) to fasten the belt.
To open the belt, press the two catches on the
connector at the same time (see Fig. C).
Switching on / off / Selecting
the temperature
To begin, first connect the control
1
to the
heating pad with the plug-in connector
3
(see Fig. B).
Switching on:
Set the control unit
1
to setting 1, 2, 3, 4, 5
or 6 to switch on the heating pad.
Note: The function indicator
2
illuminates after
the heating pad is switched on.
Note: This heating pad features rapid heating,
which allows it to heat up within the first 10 minutes
of operation.
Switching off:
Set Level 0 on the control
1
to switch the
heating pad off.
Note: The function indicator
2
ceases to illuminate.
Selecting the temperature:
Just before using the heating pad, set it to the
highest temperature level (Level 6). This will
cause the heating pad to warm up quickly.
If you wish to use the heating pad over several
hours, set the lowest temperature level (Level 1).
Temperature levels
Set the required temperature level on the
control
1
(see Fig. A).
Level 0: off
Level 1: minimum heat
Level 2–5: customised heat
Level 6: maximum heat
Automatic switch-off
Note: The heating pad switches itself off auto-
matically after about 90 minutes. The function
indicator
2
then starts to flash.
Then select the setting “0” and after about
5 seconds, reset the heating pad to the desired
temperature setting to switch it on again.
Switch the heating pad off (setting “0”) and
pull the mains plug out of the mains socket if
the heating pad is not to be used after it has
switched itself off automatically.
Cleaning and care
DANGER
TO LIFE BY ELECTRIC SHOCK!
Always remove the mains plug from
the socket and the plug-in connector
3
with
the control
1
from the heating pad (see Fig. B)
before cleaning the heating pad.
DANGER OF ELECTRIC SHOCK!
Do not reconnect the control
1
to
the heating pad until the plug-in con-
nector
3
and the heating pad are completely
dry. There is otherwise a risk of an electric shock.
DANGER OF ELECTRIC SHOCK!
DANGER OF MATERIAL
DAMAGE! Do not under any
circumstances switch the heating pad on to
help it dry.
Use a dry, non-fluffing cloth for cleaning and
care of the heating pad and control
1
.
66353_silv_Ruecken_Nacken_Heizkissen_Content_LB5.indd 33 17.05.11 13:28
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest P10F - IAN 66353 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest P10F - IAN 66353 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest P10F - IAN 66353

Silvercrest P10F - IAN 66353 User Manual - German, Dutch, French, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info