566378
9
Zoom out
Zoom in
Previous page
1/24
Next page
SilverCrest MP10 English
7
Installing the hardware
After you have inserted the rechargeable batteries the optical sensor (2) on
the underside of the wireless mouse lights up.
1. Plug the USB connector of the charger unit into a USB port on your
switched on computer. The operating system automatically recognises the
new hardware and installs the required drivers.
2. During this short, one-off, procedure a message appears first "New
hardware found", followed by the message "The new hardware has been
installed and can now be used." After you have connected the USB the
receiver indicator light (7) on the charger unit lights up.
The wireless mouse is connected to the charger unit by means of radio
transmissions. The radio channel must be synchronized the first time you use
it. The wireless mouse and charger unit must be maximum 50cm apart for this
procedure.
3. Please press the synchronizer button (8) on the charger unit to start one-
off and automatic radio synchronization between the charger unit and the
wireless mouse. The receiver indicator light (7) flashes quickly.
4. Then press the synchronizer button (3) on the wireless mouse within 20
seconds. The receiver indicator light (7) on the charger unit soon
continues to flash with a fast rhythm. When the synchronization is finished
the receiver indicator light (7) flashes with a slower rhythm.
Synchronization is finished.
If the mouse is now used the receiver indicator light (7) flashes quickly. If not,
please repeat steps 3 to 4.
If you remove or replace the rechargeable batteries you must repeat the
synchronization. Do this by following steps 3 to 4.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest MP10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest MP10 in the language / languages: English, Dutch as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info