118120
10
Zoom out
Zoom in
Previous page
1/29
Next page
- 10 -
9.3 Connecting audio components via an analogue cable
If a digital input is not available on the audio component you can connect
the DVD player to it via conventional analogue cinch cables.
To connect the DVD player with analogue cables:
Plug a cinch cable into each of the sockets
FL(front left channel), FR
(front right channel), SL(rear left channel), SR(rear right channel), CENTER
(front centre channel) and SUBWOOFER (Bass) on the rear panel of the
DVD player.
insert the cinch cables into the corresponding analogue inputs of the
audio component.
10. OSD menu settings
All possible settings on the DVD player can be administered with the remote
control via the so called "OnScreen display" menu (in short "OSD Menu").
The OSD Menu will be superimposed on the television screen.
Before you use the DVD player for the first time for playback of DVDs,
VCDs/S-VCDs or Audio-/MP3-CDs you must implement a few settings via
the OSD Menu. These settings are dependent amongst others on...
the language, in which you want the OSD Menu to be displayed
which TV standard corresponds to the television, to which you want to
connect the DVD player
Which image format your television can display
Administering settings via the OSD menu
First insert the connector plug of the DVD player's power cord into a
power socket.
To switch on the DVD player press the
POWERbutton on the front panel of
the DVD player. If the DVD player is already switched on but is in stand-
by mode, press the button
STANDBYon the remote control to switch the
DVD player on. Standby mode is indicated by the green LED on the
front panel of the device.
The device will check to see if a disc is inserted. The SilverCrest logo appears
on the television screen:
If there is no disc inserted the notice NO DISC appears on the television
screen and NO DISC is shown in the display.
Firstly please familiarize yourself with the OSD Menu's operation by
means of the following brief introduction.
IB_KH6517_18_DVDPlayer_LB6.qxd 23.01.2008 19:07 Uhr Seite 10
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH6517 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH6517 in the language / languages: English as an attachment in your email.

The manual is 1,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH6517

Silvercrest KH6517 User Manual - Dutch - 29 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info