118093

Silvercrest KH6506 Manual

12
Zoom out
Zoom in
Previous page
1/29
Next page
- 10 -
8.1. Using the OSD Menu
To summon the DVD player's OSD Menu...
• Press the "SETUP" button on the remote control.
The OSD Menu with its menu options will appear on the
television screen:
The following menu options can be set:
Language, Video, Audio, Rating and Misc.
• The control buttons will move you through the
OSD Menu. To confirm a selection or input press the "OK"
button.
• To exit the selected OSD Menu option press the control
button , until the left Menu tab (Language, Video etc.)
is active. Select another Menu tab with the control buttons
and activate the OSD Menu option with the control
button .
• To exit the OSD Menu press the button "SETUP" again.
8.2. Language Settings
You can preset the languages for the OSD-language, DVD-
Menu, Subtitles, Audio and DivX Subtitles functions. These
settings are valid for every DVD if the selected language is
present on the DVD.
- OSD language: Here you set the language, in which the
OSD Menu will be displayed on the tele-
vision screen.
- DVD menu: Here you set the language, in which the
DVD Menu will be displayed on the tele-
vision screen. Not all films contain a menu
on the DVD. If a menu is available then it
can only be shown in the language that
you set if this language is available on
the DVD. If the selected language is not
available then the DVD Menu will be dis-
played in another language.
- Subtitle: Here you set the language of the subtitle
when the playback of a DVD is displayed
on the television screen (only if the lang-
uage is present on the DVD).
- Audio: Here you set the language, in which the
DVD should be started. Films can then
only be played back in the language that
you selected if this language is available
on the DVD. If the selected language is
not available the DVD will start with an-
other language.
- DivX subtitle: Here you set the character encoding for
the DivX Subtitle. The standard setting is
Western European.
- Position: Here you set the position
(Bottom/Middle/Top) of the DivX
Subtitles.
8.3. Video settings
In this OSD menu you can implement the settings for Aspect
Ratio, View Mode, TV-System, Video output, brightness, con-
trast, tint, and color.
- Aspect Ratio: Here you set the Image format, in which
the film should be displayed on the tele-
vision screen (4:3 or 16:9). The correct set-
ting depends on the television to which
you would like to connect the DVD player.
- View Mode: Here you can align the height and width
of the image presentation with the play-
back appliance being used, i.e. Pan &
Scan (Alignment of the wide image for-
mat to the 4:3 presentation).
- TV-System: Here you set the TV-Standard
(PAL/NTSC/Multi) of your playback device.
Only set "Multi" if you have connected
the DVD player to a Multi standard tele-
vision.
- Video-out: Here you set the Video output, through
which the DVD player is connected to the
playback device.
ƽ IMPORTANT!
In the event that you set an incorrect Video output, for example
"P-Scan", although your television is not capable of Progressive
Scan, then the television screen will suddenly become black.
This is not a defect of the television or the DVD player!
In a case such as this...
• Press the
"STOP" button on the front panel of the DVD
player or on the remote control.
KH 6506
KH6506_V2955_UK 02.04.2007 15:10 Uhr Seite 10
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH6506 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH6506 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info