118093
8
Zoom out
Zoom in
Previous page
1/29
Next page
- 6 -
6. Connecting the DVD Player to a Television
After setting up the DVD player, you can now connect it to a
television. The DVD player can be connected to a television
that operates with the PAL, NTSC and SECAM standards.
If you want to use the DVD player on a television with...
... NTSC standard you will have to change the video setting
in the DVD's so called "OSD menu". There PAL is set as the
television standard at the factory.
SECAM standard you do not need to change any settings.
The factory setting for the PAL standard also allows the
DVD player to operate with SECAM televisions in so far as
these can process the signals.
Ô
On this topic see also capital 8.3 "Video settings: Set the
television standard"
Depending on the features of the television, there are various
options for connecting the DVD player to it:
6.1. Connecting to a Television via ScartCable/RGB
NOTE:
Connecting the DVD player to a television with a Scart cable
via the RGB input offers a high quality connection. Select this
connection variation in the case of televisions equipped with
an RGB input. If you are not sure if the television is equipped
with an RGB input then you can check this by consulting the
television's instruction manual.
Connect the jack inscribed with EURO SCART to a television
Scart socket by using the supplied Scart cable.
For playback select the matching channel on your tele-
vision Check with the television's instruction manual on
how you can set the AV channel.
In the OSD menu select the menu Video/Video out/RGB.
Ô
On this topic see also capital 8.3 “Video settings:
Video out“.
6.2. Connecting to a Television via S-Video
NOTE:
For this connections variant the television must be equipped
with an S-video input and two unoccupied audio cinch sockets.
If you are not sure if the television is capable of handling S-video,
for example via cinch sockets, then you can check this by con-
sulting the television's instruction manual.
For this connection variant you will need:
an audio cinch cable (not supplied)
an S-video cable (not supplied) These can be obtained
from your dealer.
In order to connect the DVD player to a television via S-video...
Connect the jack inscribed with S-VIDEO to a television S-video
socket using an S-video cable.
Insert the white audio cinch cable plug into the cinch socket
inscribed "FL" on the rear panel of the DVD player.
Then insert the white plug at the other end of the audio
cinch cable into the left channel audio socket on the tele-
vision.
Insert the red audio cinch cable plug into the cinch socket
inscribed "FR" on the rear panel of the DVD player.
Then insert the red plug at the other end of the audio
cinch cable into the right channel audio socket on the tele-
vision.
For playback select the matching channel on your tele-
vision Check with the television's instruction manual on
how you can set the AV channel.
In the OSD menu select the menu Video/Video out/
S-Video.
Ô
On this topic see also capital 8.3 "Video settings:
Video out“.
KH 6506
KH6506_V2955_UK 02.04.2007 15:10 Uhr Seite 6
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH6506 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH6506 in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info