118060
14
Zoom out
Zoom in
Previous page
1/30
Next page
14 GB/IE
cinch plug jack [red / rear right] fs.
Insert the white plug of the cinch connection
cable as far as it will go into the LINE IN L cinch
plug jack [white
/ rear left]
ft.
Then insert the 3.5 mm stereo jack into the
headphone output of the audio device.
In order to play back the sound, press the
LD / MD
button buuntil the letters AUX
appear in the display window.
For operation of the external device, please see
its operating instructions.
L
Connecting to the aerial
of the motor vehicle
Guide the connection cable of the vehicle aerial
carefully out of the front of the DIN assembly
bracket up to the car radio.
Insert the plug of the connection cable of the
vehicle aerial as far as it will go into the aerial
socket
goof the car radio.
If necessary, use an aerial adapter in accordance
with the technical data of the aerial.
If present: Connect the 12 V DC connection cable
of an electric aerial to the electric aerial
fn
plug-in.
L
Attaching to the DIN assembly
bracket
Insert the rear of the car radio together with
the connected cables carefully into the DIN
assembly bracket.
Ensure that no objects are able to cover the
vents of the metal housing
dt.
Ensure that there is no connection cable
between the metal housing
dt and the DIN
assembly bracket. Prevent the cables from
becoming caught, as any damage may result in
a short circuit and malfunctioning of the device
or the vehicle’s electronic system.
Push the car radio into the DIN assembly bracket
until it distinctly locks into place.
You should also secure your device against
theft. Fix the attachment screw
frwith the
anchoring plate and the attachment material to
the engine fire wall of the vehicle.
Ensure that all cables are properly connected
and that the power supply is working correctly.
The LED (red)
/ power supply
dqflashes.
Use the tip of a ballpoint pen to press the reset
button
dron the front of the device (see Fig. C).
L
Attaching the control panel
Remove the control panel 1from the plastic
box.
Avoid hard contact with the display window
3.
Place the rear left-hand edge of the control
panel
1on the control panel attachment point
dpon the front of the device.
Ensure that the plug-in connection strip
cris
positioned in front of the connection socket
dl.
Carefully press the rear right-hand edge of the
control panel
1against the control panel
attachment point
dpuntil it distinctly locks into
place.
Fold the control panel
1upwards and allow it
to lock into place.
L Operation
L Switching on
Press the
PWR / DIM
button cn.
The factory settings of the device are as follows:
The word [WELCOME] appears in the display
window
3.
The buttons are illuminated in blue (these can
be adjusted on two levels).
Installation / Operation
KH2380_Content_UK.indd 14 12.09.2006 11:57:12 Uhr
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH2380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH2380 in the language / languages: English as an attachment in your email.

The manual is 4,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH2380

Silvercrest KH2380 User Manual - German - 29 pages

Silvercrest KH2380 User Manual - Dutch, French - 58 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info