470712
17
Zoom out
Zoom in
Previous page
1/34
Next page
- 15 -
8. If the device does not react again carry on switching
every 1.5 seconds with the button h to the previous
code until the device reacts.
9.
Then press the OK button l to save the code. The LCD
display q shows "SUCCESS" and then returns again to
the "AUTO SEARCH" mode.
10.
Press the EXIT button j twice to exit the programming
mode.
11. Check to see if the majority of your device's functions
can be controlled with the remote control. In the event
that a few functions are not working you can start the
automatic code search again beginning with step 1.
Tips:
If the PAUSE ;button d is pressed during the automatic
code search the code search stops. Pressing on the PAUSE ;
button d again allows the device to take up the search once
more.
1.
During an active code search all buttons except OK l,
PAUSE ; d, , h and EXIT j will be ignored.
2.
If the EXIT button j is pressed during the code search
the search will stop and the "AUTO SRCH" status is
again accessed without the code being saved.
3. Should the correct code be found, however the device's
original remote control did not have a POWER button
then it is possible that the device cannot be switched on
ororemotely.Thentrythebuttons h, CH + y or
MUTE 2#.
4.
If the automatic search has reached the end of the code
list it stops there. Then press the EXIT button j to return
to the "AUTO SRCH" mode and start again with step 4.
5. If you want to programme an AUX device by automatic
codesearchthedevicetypemustrstbedenedby
direct code input. After which you carry out the auto-
matic code search from step 5.
Learn function
The Universal remote control (URC) can learn and save button
signals of an original remote control. If the URC does not
work after applying the programming methods already
described or cannot carry out all commands please attempt
to teach the URC with the help of the original remote control.
Use new batteries for the URC and the original remote •
control.
Maintain a distance of at least one metre from other light •
sources. The light sources could disrupt the infrared trans-
mission.
Place the URC and the original remote control at a distance
of 25 to 55 mm from each other on an even surface so that
the Infrared diodes 2^ are facing each other.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH 2155 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH 2155 in the language / languages: English as an attachment in your email.

The manual is 1,77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH 2155

Silvercrest KH 2155 User Manual - German, Dutch - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info