Manual Silvercrest KH 2130 06 IAN 35269 (page 46 of 61) (English, Italian, Portuguese, Spanish)

737524

Zoom out

Zoom in

1/61

- 44 -

For the sound transmissions use, if neces-

sary, the AUDIO adapter 3,5 mm jack on

CINCH sockets 2$, which you connect to

the output of the sound card if this has

no cinch output. The yellow plug of the

CINCH—3,5mm jack cable 2) you con-

nect to the video card's video output.

Tips:

The video card must have an FBAS

output available.

Make sure that the computer is cor-

rectly configured for outputting video

on the video card.

Connecting the receiver

Connect the Audio/Video CINCH out-•

puts h of the receiver d to the A/V in-

puts on the target device, probably a

television set. For this you use the sup-

plied three core CINCH cable 2%. If

necessary, with the aid of the supplied

SCART—CINCH adapter "IN" 2!.

Note:

Be sure to match the colours correctly.

Insert the cable plug of the second •

supplied wall plug transformer 1( into

the connection socket for the supply

voltage j.

Insert the wall plug transformer • 1( into

a properly connected 230 V

/ 50 Hz

mains power socket.

Important!

Try, if required, to operate the receiver d

in various locations to avoid cancella-

tion effects and interference and thus

improve the transmission quality.

Switching on

Move the ON/OFF switch • a and k

of the transmitter and receiver to the

"ON" position to switch them both on.

Switch the signal source on and, if •

necessary, start playback.

Switch the TV (target device) on and •

activate the A/V inputs to which you

have connected the receiver.

Select on the transmitter and on the •

receiver, via the CHANNEL switch s

and l, implicitly in each case the

same transmission channel. The radio

transmission should now function.

Note:

The data/signals sent from the transmit-

ter are not encrypted. This means that

compatible devices within the recep-

tion range are capable of eavesdrop-

ping on the signal. The radio transmis-

sion set uses an "open standard".

To switch the signal source AV 1 and/•

or 2 for a TV connected to the trans-

mitter q press the button "ROOM 1" e

(= the room in which the transmitter is

located).

To switch the signal source AV 1 and/•

or 2 for a TV connected to the receiver

d press the button "ROOM 2" r

(= the room in which the receiver is

located).

Point the remote control of the signal •

source to the infrared receiver f of

the receiver d. The commands are

sent to your signal source.

IB_KH2130_DT35269_LB5new.indb 44IB_KH2130_DT35269_LB5new.indb 44 04.09.2009 13:10:45 Uhr04.09.2009 13:10:45 Uhr

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH 2130 06 IAN 35269 in the language / languages: English, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH 2130 06 IAN 35269

Silvercrest KH 2130 06 IAN 35269 User Manual - German, Dutch - 26 pages

Silvercrest KH 2130 06 IAN 35269 User Manual - French - 37 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest KH 2130 06 IAN 35269 Manual

Product: