618692
7
Zoom out
Zoom in
Previous page
1/8
Next page
- 5 -
Cleaning
Self-cleaning function
Fill the water container up to the marking MAX.
Insert the plug into the power socket.
Set the temperature regulator
a
to the position
MAX.
Let the iron warm up till the control light
w
cuts
off and lights up again.
Hold the iron horizontally over a trap vessel.
Set the steam regulator
u
to Self-Clean position
and hold it in this position. Now steam and boiling
water will start emerging from the steam escape
holes at the gilding sole
r
. Any dirt, if present,
will get washed out.
Release the steam regulator
u
as soon as the
water in the water container is used up.
To ensure that no water remains in the steam
chamber, dry the gilding sole
r
thoroughly. For
this purpose, wipe the gilding sole
r
a few
times on a towel or an old cloth.
Allow the iron to cool down before storing it
away.
Note:
The effect of the self-cleaning function can diminish
after extended usage of the iron. We therefore re-
commend the addition of decalcification agent into
the water tank.
Casing
Danger of injury!
Pull the mains power plug before cleaning. There is
a risk of electrical shock! Allow the device to cool
off. Danger of burning!
Clean the casing only with a soft dry cloth.
Do not use aggressive or chemical cleaning
agents.
Metal Parts
Clean the metal parts with a cloth slightly
moistened with water and a mild, non-foaming
cleaning agent.
Troubleshooting
The steam iron puts out only little or no steam
The water reservoir in the steam iron is empty. Fill
the water reservoir with tap water (see "Filling with
Tap Water“).
The steam iron does not get hot
The steam iron is not plugged in or not switched on.
Plug the power plug into the power socket and set
the temperature control
a
to the desired
temperature.
The steam iron is defect. Have the defect steam iron
repaired by qualified technicians.
Technical Data
Power Supply Voltage: 230 V
~
/50 Hz
Power: 1200 W
IB_KH1281_E33210_LB6 10.06.2009 12:28 Uhr Seite 5
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH 1281 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH 1281 in the language / languages: English as an attachment in your email.

The manual is 0,26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH 1281

Silvercrest KH 1281 User Manual - German, Dutch, French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info