470705
7
Zoom out
Zoom in
Previous page
1/18
Next page
- 5 -
Before baking
Removing and replacing the baking
mould
To take out the baking mould 4 (Fig.1):
Turn the baking mould 4 slightly in an anti-clockwise
direction, until you can lift it out of the Bread Baking
Machine (Marking “REMOVE “ in the baking
space 0).
To replace the baking mould 4 (Fig. 2):
Place the baking mould 4 slightly slanting on the
drive shaft. Turn the baking mould 4 lightly in a
clockwise direction, until it is sitting correctly in the
baking space 0. (Marking “ LOCK” in the
baking space 0).
Fig. 1: To remove : Fig. 2: To replace
Tips for baking
For a successful baking process, please consider
the following factors:
Remove the baking mould 4 from the housing
before filling it with ingredients. Should ingre-
dients fall into the baking space 0, a fire may
be caused by them burning on the heating ele-
ments.
Place ingredients into the baking mould 4 in
the sequence specified.
To ensure an optimal rising result from the yeast,
all ingredients should be at room temperature.
Measure the ingredients precisely. For this use,
for example, the supplied measuring beaker w.
With the scales on the measuring beaker w
being in Milliliter (ml) and Ounces (oz) you can
measure ingredients in various measurement
units. Even seemingly negligible deviations from
the quantities specified in the recipe may affect
the baking results.
Risk of fire!
NEVER use quantities larger than those specified.
If there is too much dough, some could spill over
the baking mould 4, drop onto the hot heating
elements and cause a fire.
Control panel
7 Display
Basic adjustments
The default adjustments are shown as soon as the
appliance is connected to a power source. This
display signalises operational readiness. It corresponds
to the programme Basic:
In the display appears 7 "1 3:10". The "1"
indicates which programme is currently selected,
"3:10" is the programme duration in hours and
minutes.
The positions of the two arrows on the upper
edge of the display 7 give information about
the selected level of browning (left arrow) and
the volume (right arrow). The default adjustments
when switching on are: Bread weight 900 g and
"Medium browning level".
During use, the programme progress can be read
off from the backwards running time countdown in
the display 7.
IB_KH1172_E4980_LB6.qxd 20.06.2008 10:23 Uhr Seite 5
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KH 1172 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KH 1172 in the language / languages: English as an attachment in your email.

The manual is 0,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest KH 1172

Silvercrest KH 1172 User Manual - German, Dutch, French - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info