118137

Silvercrest KDT-77 Manual

18
Zoom out
Zoom in
Previous page
1/40
Next page
18
English
Radio mode
Switch on the unit (see page 15) and select radio as signal source using FM/AM
(on the remote control or the unit).
If your unit is powered off, you can also switch on the radio directly with the
FM/AM button.
Note:
All antennas should be connected and installed as shown on page 12 to
ensure a good quality reception.
FM / AM
Use the FM/AM button to switch between the frequency ranges FM (UKW, 87.5
MHz to 108.0 MHz) and AM (medium wave, 531 kHz to 1602 kHz)
Each frequency range selected will be briefly shown in the unit display.
Radio channel search
Hold the SEEK+ or SEEK- buttons (on the remote control or the unit) for approx. 2
seconds to automatically scan for radio channels.
To fine-tune the frequency press the SEEK+ or SEEK- buttons briefly.
Save radio channels
You can save up to 20 channels per frequency
To save the radio channels that you have tuned in, press SET (on the remote
control or the unit) and select the channel number to assign the channel to using
CH+ and CH- . You then have to confirm your choice within 10 seconds using the
SET button. Use any button other than SET, CH+ and CH- to cancel the memory
function.
Note:
The preset radio channels are numbered 0 to 19.
Selecting a saved radio channel
If you have already saved channels, you can navigate through these channels
using CH+ and CH-.
Use 0 – 9 on the remote control to select a radio channel directly. If you want to
select a two digit channel, first press 1 and then the second digit immediately
afterwards.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest KDT-77 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest KDT-77 in the language / languages: English as an attachment in your email.

The manual is 7,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info