Manual Silvercrest IAN 91522 (page 9 of 70) (English, German, Dutch, Danish, French, Swedish, Finnish)

562491

Zoom out

Zoom in

1/70

9 GB/IE

Always replace both batteries. Use only batteries of the

same type.

When inserting the battery, ensure the correct polarity!

This is shown in the battery compartment.

If necessary, clean the batteries and device contacts before

inserting the batteries.

Remove spent batteries immediately from the device. There

is an increased danger of leaks!

Batteries must not be disposed of in the normal domestic

waste!

Every consumer is legally obliged to dispose of batteries

in the proper manner!

Keep batteries away from children; do not throw them in

the ﬁre, short-circuit them or take them apart.

If the above instructions are not complied with, the batteries

may discharge themselves beyond their end voltage. There

is then a danger of leaking. If the batteries have leaked

inside your device, you should remove them immediately

in order to prevent damage to the device!

Avoid contact with the skin, eyes and mucous membranes.

Any parts of the body coming into contact with battery

acid should be rinsed oﬀ with copious amounts of water

and / or a doctor contacted if necessary!

Preparing the product for use

Remove the insulation strip from the battery compartment

Replacing the batteries (Fig. B)

Open the battery compartment

on the back of the scale.

Remove the used batteries, if present.

Insert 2 x 1.5 V AAA batteries into the battery compart-

ment

Note: Make sure you ﬁt the batteries the right way round

(polarity). The correct polarity is shown inside the battery

compartment

Close the battery compartment

Setting the time (Fig. A)

After you have inserted the batteries, the scale switches auto-

matically into the time mode

. As soon as the scale has

switched into the time mode

, the hour value ﬂashes in the

LC display

. In this event, skip the next two steps.

If the scale is in the weighing mode, press and keep pressed

the MODE button

for approx. 2 seconds to switch into

the time mode

Press and keep pressed the TARE button

for approx.

3 seconds to set the time.

Press the MODE button

to set the desired hour value.

Press and keep pressed the MODE button

to speed up

the value-setting process.

Press the TARE button

to conﬁrm your setting. Then the

minute value ﬂashes.

Press the MODE button

to set the desired minute value.

Press and keep pressed the MODE button

to speed up

the value-setting process.

Press the TARE button

to conﬁrm your setting.

Note: If you do not press another button within 60 seconds,

the set value stops to ﬂash and the time is set.

91522_silv_Kuechenwaage_Content_GB_FI_SE_DK.indd 9 06.06.13 12:28

changed batteries and screen starts counting in hundreds gets to 2400 and starts again any idea whats up Submitted on 13-12-2018 at 13:02
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 91522 in the language / languages: English, German, Dutch, Danish, French, Swedish, Finnish as an attachment in your email.

The manual is 2,65 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 91522

Silvercrest IAN 91522 User Manual - German, Dutch, French, Italian - 44 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 91522 Manual

Product: