642331
5
Zoom out
Zoom in
Previous page
1/12
Next page
9 GB/IE
Setting up
ton
2
of one channel. In addition,
you can programme six remote
controls one after the other and use
them for individual receivers. This
means you can switch one appliance
on and off from up to six different
places.
6. In this case, synchronise every remote-
controlled socket with the channel
of the remote control.
7. The coding of the remote control is
maintained when you change the
battery.
8. If you disconnect the remote-con-
trolled socket from the power supply,
the codings will be permanently
stored.
9. In order to delete the codings again,
press the LEARN button
7
longer
than 6 seconds until the LED oper-
ating status display
6
starts to flash.
All codings will now be deleted.
10. Avoid interference: Make sure that
the distance between the various
remote-controlled sockets is ap-
prox. 50 cm.
11. Every remote-controlled socket also
has a manual ON / OFF switch
5
.
You can switch the remote-controlled
socket on and off without using the
remote control. The LED operating
status display
6
will indicate
whether the remote-controlled sock-
et is in the ON / OFF mode.
Q
Setting up the remote-
controlled dimmer socket
(FSD B 20-A) (fig. B)
1. Insert the remote-controlled socket
into an earthed household socket
and switch it on with the ON / OFF
switch
5
.
2. Point the remote control at the remote-
controlled socket at a distance of
approx. 50 cm.
3. Press the LEARN button
7
of the
remote-controlled socket for ap-
prox. 3 seconds and release it again.
The LED operating status display
6
will flash for approx. 10 seconds.
While it is flashing, press the desired
ON button of the channel ON /
OFF button
2
(A, B, C or D) of the
remote control. The LED operating
status display
6
will now shine
permanently. You can now switch a
connected consumer on or off using
the remote control.
4. The coding of the remote control will
be maintained even when you
change the battery.
5. When you unplug the remote-con-
trolled sockets from the power supply,
the codings will be stored perma-
nently.
6. Avoid interference: Make sure that
the distance between the various
remote-controlled sockets is ap-
prox. 50 cm.
7. In order to delete the codings again,
press the LEARN button
7
longer
than 6 seconds until the LED oper-
ating status display
6
starts to flash.
All codings will now be deleted.
66538_silv_Funkschaltset_Content_GB-IE.indd 9 29.06.11 11:45
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 66538 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 66538 in the language / languages: English as an attachment in your email.

The manual is 1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 66538

Silvercrest IAN 66538 User Manual - German, Dutch, French - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info