738637
29
Zoom out
Zoom in
Previous page
1/40
Next page
33 GB/MT
Safety system / Preparing for use / Use
If the safety system switches the electric underblanket
off automatically due to a fault, then the function in-
dicator
2
on the control unit
1
ceases to illuminate,
even if the electric underblanket is switched on.
J Please note that, for safety reasons, the electric
underblanket must not be used in the event of a
fault and must be sent to the service centre ad-
dress given below.
Q
Preparing for use
Q
Placing the electric
underblanket
j Starting at the foot end, spread out the electric
underblanket over the mattress. The plug-in
connector
5
on the electric underblanket
should be towards the head end.
j Then place the bottom sheet as usual over the
electric underblanket, so that the electric under-
blanket lies between the mattress and the bottom
sheet.
j Ensure that the electric underblanket is com-
pletely flat and that it does not become drawn
together or folded during use.
j Switch the electric underblanket on approximately
30 minutes before going to bed and cover it
with the top sheet and other bedding. By doing
this you will keep all the heat in.
Q
Switching on / off /
Selecting the temperature
j First connect the control unit
1
to the electric
underblanket by plugging the two parts of the
plug-in connector
5
together (see Fig. B).
Switching on:
j Using the temperature setting switch
3
on the
control unit
1
, set the temperature to setting
1, 2, 3, 4, 5 or 6 to switch on the electric under-
blanket. The function indicator
2
illuminates.
Switching off:
j Using the temperature setting switch
3
on the
control unit
1
, set the temperature to setting 0
to switch off the electric underblanket. The function
indicator
2
ceases to illuminate.
Selecting the temperature:
j This electric underblanket has a rapid heat-up
feature.
j Set the control unit to the highest temperature
setting (setting 6). This will cause the electric
underblanket to warm up quickly.
j For use over several hours, set the control unit
1
to the lowest temperature setting (setting 1).
Q
Use
Q
Setting the temperature
j Using the temperature setting switch
3
on the
control unit
1
, set the temperature to the desired
temperature setting (see Fig. A).
Setting 0: Off
Setting 1: Minimum heat
Settings 2 - 5: Customised heat
Setting 6: Maximum heat
The foot zone is the warmest part of the electric
underblanket.
Note: This electric underblanket has overheating
protection.
After a period of approx. 3 hours at temperature
settings 5 or 6, the electric underblanket automatically
switches down to setting 4.
Q
Selecting the automatic
switch-off time
j Using the switch-off time setting switch
4
on
the control unit
1
, set the desired switch-off
time. The switch-off time can be set to 1, 3, 6
or 12 hours.
64704_silv_Waermeunterbett_Content_LB5.indd 33 06.05.11 14:02
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 64704 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 64704 in the language / languages: English, Portuguese, Spanish as an attachment in your email.

The manual is 2,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 64704

Silvercrest IAN 64704 User Manual - German, Dutch, French, Italian - 32 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info