Manual Silvercrest IAN 37702 (page 19 of 106) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish)

737526

Zoom out

Zoom in

1/106

English 19

몇 Warning

Hot steam iron and hot steam escaping!Point

out to other people the possible risk of being

scalded or burned. Never direct the steam jet at

people or animals (risk of scalding). Do not touch

any electrical leads or combustible objects with

the hot steam iron.

Î Firmly insert the steam plug (H5) into the ap-

pliance connector (A1). The locks of the

steam plug must lock into the cover of the

appliance connector.

All fabrics can be steam ironed. Delicate imprints

or fabrics should be ironed on the reverse or ac-

cording to the manufacturer’s specifications.

Î Insert the mains plug (A7) into a socket.

Both indicator lamps (A2/A3) must illumi-

nate.

Î Adjust the temperature control (H2) of the

steam iron within the notched range (•••/

MAX).

Î Once the indicator lamp (H1) on the steam

iron has switched itself off, the steam iron is

ready for use.

Note:The sole plate must be hot to prevent

the steam from condensing on the sole plate

and dripping onto the garment to be ironed.

Î Press the switch (H3) on the iron.

– Steaming at intervals: Press the switch to

the front. A steam burst is emitted while the

switch is being pressed.

– Continuous steaming: Press the switch to

the back. The switch locks and steam is con-

tinuously emitted. To release, press the

switch to the front.

Î Direct the first burst of steam at a separate

piece of cloth until the steam is emitted even-

ly.

Î You can hold the iron in an upright position

to apply steam to curtains, dresses, etc.

Note:Even if you iron without steam, there must

be water in the boiler.

Î Adjust the temperature control (H2) of the

steam iron according to the garment you

want to iron.

 Danger

Always disconnect the mains plug (A7) and allow

the steam cleaner to cool down before perform-

ing any maintenance work.

Rinse the steam cleaner boiler at the latest after

5 boiler fillings.

Î Fill the boiler with water and shake it strong-

ly. This dissolves lime scaling residing on the

boiler bottom.

Î Empty water out.

Note: If you always use usual commercial dis-

tilled water it is not necessary to descale the boil-

er.

As limescale builds up on the boiler walls, we

recommend to descale the boiler in the following

intervals (RF=reservoir fillings):

Note: Please contact your Conservancy Board

or the local water supply company to inquire

about the hardness of your water.

Î Disconnect the mains plug (A7) from the

socket.

Î Completely empty the steam boiler.

몇 Warning

Use commercial decalcifier for decalcifying the

unit.

Caution

Use caution when filling and emptying the steam

cleaner. The descaling solution can have an ag-

gressive effect on delicate surfaces.

Î Pour the descaling solution into the boiler

and allow it to react for approximately 8

hours.

몇 Warning

Do not screw the safety cap (A4) on the appli-

ance during the decalcifying.

Do not use the steam cleaner as long as there is

decalcifying agent in the boiler.

Î Empty the descaling solution after 8 hours. A

small amount of the solution will remain in

the boiler. Therefore, you should rinse the

Steam iron (H1)

Steam ironing

Dry ironing

• Synthetics

•• Wool, silk

••• Cotton, linen

Maintenance and care

Rinsing the boiler

Descaling the boiler

Degree of hardness ° dH mmol/l RF

I soft 0- 7 0-1,3 55

II medium 7-14 1,3-2,5 45

III hard 14-21 2,5-3,8 35

IV very hard >21 >3,8 25

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 37702 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,73 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 37702 Manual

Product: