737526
16
Zoom out
Zoom in
Previous page
1/106
Next page
16 English
Caution
Safety devices protect the user and must not be
modified or bypassed.
The pressure controller keeps the boiler pres-
sure during the operation as constant as possi-
ble. The heating is turned off if the maximum
operating pressure of 4 bar is reached in the boil-
er and is reactivated in case of a pressure drop
in the boiler due to steam tapping.
If the boiler thermostat fails and the appliance
overheats, then the safety thermostat turns off
the appliance.
Please contact your local CUSTOMER SERV-
ICE to arrange for the reset of the safety thermo-
stat.
The safety lock seals the boiler against the
steam pressure that builds up in the boiler. If the
pressure controller is defect and the steam pres-
sure in the boiler rises, a pressure control valve
in the safety lock opens, and steam is emitted
through the lock to the outside.
Please contact your local CUSTOMER SERV-
ICE before you put the appliance into operation
again.
Steam
CAUTION - Danger of scalding
Î Illustration
Insert steering roller (A9) and transport
wheels (A8) and lock them.
Î Tightly insert the steam plug (B6) into the ap-
pliance connector (A1). The plug must click
into place audibly.
To detach: Press the cover of the appliance
connector to the bottom and disconnect the
steam plug from the appliance connector.
Î Illustration
Connect the required accessories to the
steam gun (B1).
Insert the open end of the accessory on the
steam gun and push onto the steam gun until
the unlocking button (B2) of the steam gun
locks into place.
Î Illustration
Use the extension pieces (E1) if necessary.
To do so, connect one or both extension
pieces to the steam gun (B1). Insert the re-
quired accessories on the free end of the ex-
tension piece.
Danger
Hot water may drip out of the accessory parts
while you are detaching them! Never detach ac-
cessory parts while steam streams out - risk of
scalding!
Î Push the steam lever locking (B3) to the front
(steam switch blocked).
Î Illustration
To detach the accessory parts, press the un-
locking button (B2 or E2), and pull the items
apart.
Note: If you always use usual commercial dis-
tilled water it is not necessary to descale the boil-
er.
Caution
Do not use condensation water from the drier!
Do not fill in detergents or other additives!
Î Remove the safety cap (A4) from the device.
Î Empty remaining water from boiler.
Î Fill the boiler with a maximum of 1.2 liters of
fresh tap water.
Safety Devices
Pressure controller
Safety thermostat
Safety lock (A4)
Symbols on the machine
Operation
Attaching the Accessories
Removing the Accessories
Fill up with water
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 37702 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 37702 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info