753799
13
Zoom out
Zoom in
Previous page
1/168
Next page
10 GBIE SEMK 105 A1
Operation and use
Filling the appliance
CAUTION! PROPERTY DAMAGE!
Never fill hot water into the water tank ! The water temperature should
be between 8 and 25°C.
NOTE
Before filling the appliance, make sure that the cap is firmly in the drain
opening on the underside of the appliance. Otherwise, the filled water
will flow straight out again.
Open the lid and take out the ice basket .
Use a container such as a measuring cup to fill the water tank .
Never exceed the MAX marking.
Replace the ice basket in the appliance and close the lid .
Starting ice cube production
WARNING
Always use fresh drinking water to prepare ice cubes. Never reuse the
water from thawed ice cubes!
Press the button to start ice production.
The control lamp lights up permanently green.
After around 7 15 minutes, depending on the water and ambient
temperature, you will hear ice cubes start to fall into the ice basket .
To remove ice cubes, open the lid and remove the required amount of
ice cubes using the ice scoop . Then close the lid again.
If the "Ice full" lamp lights up red, the ice basket is full. Ice cube
production is stopped and the appliance stops cooling. As soon as you
have removed enough ice cubes, the appliance will resume production.
NOTE
Sometimes, the finished ice cubes pile up and obstruct the light sensor. Ice
cube production is then stopped, even though the ice basket is not yet
full. If this happens, use the ice scoop to redistribute the ice cubes in
the ice basket so that the light sensor is no longer obstructed. Ice cube
production will resume automatically.
If the "Add water" lamp lights up red, the water fill level is too low. Ice
cube production is interrupted and the appliance stops cooling. If you want
to continue producing ice cubes, fill the water tank as described in the
section "Filling the appliance".
IB_360838_SEMK105A1_LB8.indb 10 14.09.2020 14:15:16
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 360838 SEMK 105 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 360838 SEMK 105 A1 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish, Spanish as an attachment in your email.

The manual is 1,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info