766896
14
Zoom out
Zoom in
Previous page
1/109
Next page
12 GB
Overheating protection
The device has an overheating protection
system. If the motor becomes too hot, the de-
vice automatically switches itself off:
1. Switch off the device.
2. Pull out the mains plug3.
3. Allow the device to cool down to room
temperature.
When the device has cooled down suffi-
ciently, it can be switched on again.
8.3 Switching the device on/
off and selecting speed
WARNING! Risk of material damage!
~The mixing mechanism must not be op-
erated continuously for longer than
10 minutes at a time. You must then al-
low the device to cool down to room
temperature.
NOTE:
the device may move slightly while
you are processing large quantities of dough.
1. Switch the device on by turning the
speed control2 clockwise.
2. Start at a slightly lower speed, and slowly
increase to the desired speed (see “Over-
view of functions” on page 9).
3. Reduce the speed to speed 1 - 2 when
you are adding ingredients during oper-
ation through the filling opening10.
4. Set the speed control2 to 0 to switch
the device off.
NOTE: above all, the ideal speed depends
on the consistency of the material being
blended. The more liquid the contents, the
faster you can blend them.
8.4 Pulse function
By turning the speed control2 to the po-
sition Turbo, you can briefly increase
the speed to the highest setting (8).
9. Dismantling the
device
DANGER from rotating parts!
~Turn off the device and unplug the
mains plug3 from the wall socket be-
fore disassembling the device.
Lifting up the drive arm
1. Press the unlock button1 and fold up
the drive arm12 until it engages and
the unlock button1 pops out again.
Removing the mixing tool
2. Push the mixing tool4/6/7 slightly up-
wards and turn it anticlockwise until it
can be pulled off the axle13.
Removing the splash guard
3. Turn the splash guard11 towards the
open lock symbol until it can be re-
moved.
Removing the mixing bowl
4. Turn the mixing bowl5 towards the
open lock symbol until it can be re-
moved.
Lowering the drive arm
5. Press the unlock button1 and move the
drive arm12 all the way down. The un-
lock button1 pops out again.
__360499_2010_B6.book Seite 12 Freitag, 5. Februar 2021 11:57 11
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 360499 SKM 600 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 360499 SKM 600 B2 in the language / languages: English, Dutch, Danish, French as an attachment in your email.

The manual is 3,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info