Manual Silvercrest IAN 360495 SKM 600 B2 (page 12 of 61) (English, German, Dutch, Danish, French, Polish, Swedish, Spanish)

766903

Zoom out

Zoom in

1/61

10 GB

~Protect the base unit against moisture,

water drips and splashes.

~Never touch the device with wet hands.

~The device is not fully disconnected from

the power supply, even after it is

switched off. In order to fully disconnect

it, pull out the mains plug.

~Never put your hands between the drive

arm and the housing. There is a risk of

injury from crushing when folding

down.

~Do not touch rotating parts with spoons

or similar utensils. Keep long hair and

loose clothing away from the rotating

parts.

~Always ensure that the speed control is

set to 0 before you plug the mains plug

into the wall socket.

~The mixing mechanism must not be op-

erated continuously for longer than

10 minutes at a time. You must then al-

low the device to cool down to room

temperature.

Only use the original accessories.

Overview

1 Unlock button (for the drive arm)

2Turbo 0 - 8: speed control with on/off

function

3Power cable with mains plug

4Dough hook

5Mixing bowl

6Whisk

7Beater

8Suction foot

9Base unit

10 Filling opening

11 Splash guard

12 Drive arm

13 Axle for holding mixing tools

14 Cable spool

Unpacking and setting up

1. Remove all packing material.

2. Check to ensure that all parts are pres-

ent and undamaged.

3. Disassemble the device.

4. Clean the device prior to first use!

5. Figure B: wind the excess power cable

around the cable spool14 on the un-

derside of the base unit9.

6. Place the base unit9 on a level, dry

and waterproof surface, so that the de-

vice can neither fall nor slip off.

Select a smooth, clean surface, so that

the suction feet8 can stick firmly in

place and ensure a secure grip.

CAUTION:

~Overflowing liquid would flow onto the

surface. You should therefore place the

device on a waterproof surface.

Dismantling the device

DANGER from rotating parts!

~Turn off the device and unplug the

mains plug3 from the wall socket be-

fore disassembling the device.

1. Press the unlock button1 and fold up

the drive arm12 until it engages and

the unlock button1 pops out again.

2. Push the mixing tool4/6/7 slightly up-

wards and turn it anticlockwise until it

can be pulled off the axle13.

3. Turn the splash guard

towards the

open lock symbol until it can be removed.

4. Turn the mixing bowl5 towards the

open lock symbol until it can be re-

moved.

5. Press the unlock button1 and move the

drive arm12 all the way down. The un-

lock button1 pops out again.

__360495_2010_KURZ_B8.book Seite 10 Dienstag, 2. Februar 2021 3:20 15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 360495 SKM 600 B2 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish, Spanish as an attachment in your email.

The manual is 2,44 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 360495 SKM 600 B2 Manual

Product: