766897

Silvercrest IAN 360253 SGW 860 A1 Manual

78
Zoom out
Zoom in
Previous page
1/411
Next page
78 - English
10.3. Changing the program
You can only change the program if the appliance has been operating for a short time. If
the appliance has already been running for a longer time, the detergent and water must
be replenished and the required program must be restarted.
Press the button (13) to interrupt the program.
Press the P button (17) for approx. 3 seconds until the appliance switches to standby
mode.
Then select another program: To do so, press the program selection button P several
times until the operating light(s) for the required program light(s) up.
Press the button (13) again to start the program.
The program starts after approx. 10 seconds.
10.4. Opening during operation
CAUTION!
Risk of burning!
Hot water/hot steam can escape and cause burns if the
door is opened while a program is running.
Do not open the dishwasher door fully straight away
– instead wait for about 3 seconds until the spray arm
stops rotating and then open the door completely.
The door can be opened while a program is running, allowing more dishes to be load-
ed or others to be removed. This is only efficient if the program has only been running for a
short time, as otherwise the newly loaded dishes might no longer be fully cleaned.
While the program is running, press the button (13). Wait about 3 seconds until the
spray arm stops rotating and then open the door.
Load the additional dishes and/or remove items.
Close the door again fully. Press the button (13) again to continue the program.
The program continues after approx. 10 seconds.
… 78 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 360253 SGW 860 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 360253 SGW 860 A1 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish, Spanish as an attachment in your email.

The manual is 5,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info