766897
70
Zoom out
Zoom in
Previous page
1/411
Next page
70 - English
NOTICE!
Possible material damage!
Damage to the appliance is possible if incorrect salt addi-
tive is used.
Always use dishwasher salt/regeneration salt that is suit-
able for the dishwasher.
Normal household salt is not suitable and can damage
the appliance.
Fig. L
Remove the dish rack (7) and twist the lid off the salt container (10).
Fill the salt container (10) with 0,5 l water before the first use (see Fig. L).
Use a suitable aid such as a normal household funnel to pour 130 g of dishwasher salt
into the opening on the salt container (10). It is normal if water escapes from the salt
container (10).
Once the salt container (10) has been filled, twist the lid clockwise to tighten (see Fig.
L).
To avoid damage to the appliance, always start the quick program without dishes after
adding salt (see section “10.5. Selecting a wash program” on page 79).
The salt container (10) must be filled up when the salt warning light switches
on. Once the salt consumption has been set according to “9.4. Setting salt
consumption” on page 70 and the salt container (10) has been filled, the
salt warning light goes out.
If there are salt residues in the appliance, start a quick program to rinse these out.
9.4. Setting salt consumption
For good dishwashing results, the dishwasher needs low-lime water. Adding regenerating
salt helps to achieve the required water hardness with the aid of the softening system. To
maintain the function of the softening system, regeneration is performed regularly, resulting
in higher water and energy consumption during the process (see table below).
Set the required salt consumption, depending on the local water hardness.
The table below shows what setting is necessary for your local water hardness.
70


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 360253 SGW 860 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 360253 SGW 860 A1 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish, Spanish as an attachment in your email.

The manual is 5,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info