750320

Silvercrest IAN 356366 SKKM 200 A1 Manual

23
Zoom out
Zoom in
Previous page
1/80
Next page
■ 20 │ GB│IE SKKM 200 A1
1) If the appliance is still plugged in, remove the
power plug from the mains power socket.
2) Turn the coffee bean container 2 anticlockwise
until the ▼ arrow on the coffee bean container
2 is above the symbol on the appliance.
Pull the coffee bean container 2 upwards and
off the appliance.
3) Remove the lid 1 from the coffee bean container
2. The cleaning brush q is stored beneath the
lid 1.
4) Pull the upper part of the grinding mechanism 4
upwards out of the appliance and pull off the
silicon ring 3.
5) Clean the upper and lower parts of the grinding
mechanism 4/5 as well as the output
opening 7 using the cleaning brush q.
NOTE
► During the grinding process, coffee fat is
produced, which creates residue in the
grinding mechanism 4/5 over time. Coffee
fat and coffee powder residue must be
removed at regular intervals with the cleaning
brush q to ensure an optimum grinding result.
6) Wash the coffee bean container 2 together
with its lid 1, the coffee powder container r
together with its lid e, the portafilter holder w,
the cleaning brush q and the silicon ring 3
in lukewarm washing up water. Rinse with fresh
water to remove all detergent residue, and dry
all parts thoroughly.
NOTE
► The coffee bean container 2
together with its lid 1, the coffee
powder container r together with
its lid e and the portafilter holder w can also
be washed in the dishwasher. If possible,
place all the parts in the upper basket of the
dishwasher and make sure that they are not
jammed in place.
7) Clean the surfaces of the appliance with a
damp cloth. For stubborn dirt, add some mild
detergent to the cloth. Afterwards, wipe with a
cloth moistened only with water to remove all
detergent residue. Ensure that the appliance is
completely dry before using it again.
Storage
1) Always wipe the appliance down thoroughly
before storing as described in the section
“Cleaning”.
2) Wind the power cable around the cable
retainer 8 in an anticlockwise direction. Guide
the end of the power cable with the plug
through the recess on the housing.
3) Store the appliance in a clean, dry location.
Troubleshooting
The appliance is not working.
■ The coffee bean container 2 has not been
correctly inserted.
♦ Check that the coffee bean container 2 is
correctly positioned (see section “Starting up
the appliance”).
■ The dial 9 is set to the OFF position.
♦ Set the required coffee powder quantity (see
section “Setting the coffee powder quantity”).
■ The power plug is not connected to the mains
power.
♦ Insert the plug into a mains power socket.
■ The mains power socket is defective.
♦ Use a different mains power socket.
■ The appliance is defective.
♦ Contact Customer Service (see section “Service”).
IB_356366_SKKM200A1_LB8.indb 20 26.11.2020 12:04:08
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 356366 SKKM 200 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 356366 SKKM 200 A1 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info