749467

Silvercrest IAN 356365 SMA 500 E1 Manual

37
Zoom out
Zoom in
Previous page
1/154
Next page
SilverCrest SMA 500 E1
English - 35
The milk should be cool.
Do not try to froth the milk a second time if you do not like the milk froth the first time. This is
because the milk can burn.
If you find the milk froth to be too liquidy, we recommend leaving it to rest for around 30
seconds. During this time, the liquid milk can sink down and the milk froth achieves a better
consistency.
7.6 Making warm milk froth
• Insert whisk B (5) up to the stop on the drive shaft inside the canister (7).
• Take the canister (7) off the base (11) and pour milk up to the MIN marking inside the canister
(7). The volume of the milk increases during the frothing process. Only pour milk up to the
lower MAX marking in order to prevent the milk froth from overflowing.
• Place the lid (2) onto the canister (7).
• Place the canister (7) onto the base (11).
You can make three types of warm milk froth as described in section 7.3:
• Use the On/Off button (9) to select operating mode 1. The symbol of the operating
mode 1 (13) flashes and the whisk B (5) begins to turn after approximately three
seconds. The process of creating milk froth begins.
or
• Use the On/Off button (9) to select operating mode 2. The symbol of the operating
mode 2 (14) flashes and the whisk B (5) begins to turn after approximately three
seconds. The process of creating milk froth begins.
or
• Use the On/Off button (9) to select operating mode 3. The symbol of the operating
mode 3 (8) flashes and the whisk B (5) begins to turn after approximately three seconds.
The process of creating milk froth begins.
• As soon as the milk froth is ready, the milk frother automatically switches off and the symbol of
the selected operating mode (8, 13, 14) flashes; it then goes out again after a short time.
You can stop the preparation process at any time by briefly pressing the On/Off
button (9).
• Wait around 30 seconds until any remaining fluid milk settles at the bottom of the canister (7).
• Lift the canister (7) off the base (11), remove the lid (2) and use the milk froth as you wish.
• Wait two to three minutes before using the milk frother again.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 356365 SMA 500 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 356365 SMA 500 E1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info