749467
34
Zoom out
Zoom in
Previous page
1/154
Next page
SilverCrest SMA 500 E1
32 - English
7. Initial use
Before you prepare milk for consumption for the first time, you must first clean the milk frother in
order to remove dust and any remnants of the packaging material. Follow the procedure described
in the ‘Maintenance/cleaning’ section.
DANGER of electric shock
Keep the base (11) away from water. There is danger of electric shock.
WARNING – Risk of burns
Only operate the milk frother with the lid (2) on.
The surface of the heating element is still hot after use.
WARNING – Risk of injury
Always use fresh milk. Do not consume milk that has been sitting in the canister (7) for
a long period of time.
Please note:
If you lift the canister (7) off the base (11) during operation, the preparation process
stops automatically. Place the canister (7) onto the base (11) again and restart the
process using the On/Off button (9).
You can conveniently store the whisk (4, 5) that is not currently in use in the whisk
holder (1). This is located on the underside of the lid (2).
Cable rewind
A built-in cable rewind is located on the
bottom of the base (11). You can adapt
the length of the power cable (12) to the
conditions at your location.
You can minimise the length of the cable
when you are not using the milk frother.
Unwind the power cable (12) on the underside of the base (11) against the direction of the
arrow.
Place the base (11) on a flat, non-slip and dry surface. Make sure that the power cable (12)
passes through the opening on the underside of the base (11). This is to ensure that the kettle is
positioned securely.
WARNING
If the power cable (12) does not pass through the opening on the underside of
the base (11), the base (11) and canister (7) are not positioned securely.
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 356365 SMA 500 E1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 356365 SMA 500 E1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info