Manual Silvercrest IAN 353473 SKMS 150 A1 (page 8 of 78) (English, German, Dutch, Danish, French, Polish, Swedish, Spanish)

753796

Zoom out

Zoom in

1/78

GB│IE │ 5 ■

SKMS 150 A1

Setup/initial start-up

1) Clean the appliance as described in the

chapter “Cleaning and Care”.

2) Place the appliance on a suitable and level

surface.

3) Unwind the cable from around the cable

retainer 5 and guide it through the recess on

the edge of the housing.

4) Insert the plug into a mains power socket.

The appliance is now ready for use.

Grinding coﬀee beans

forﬁlter coﬀee

1) Remove the lid 1 from the motor unit 2.

2) Fill with the required quantity of coﬀee beans.

NOTE

► Do not ﬁll the appliance with more than 70g

of coﬀee beans. If you do so, the coﬀee beans

will not be ground properly. 70g corresponds

to around 8 tablespoons of coﬀee beans!

► You will require around 6 – 8g of ground

coﬀee for one cup of coﬀee. Please observe

the instructions in the operating manual of

your coﬀee machine.

3) Place the lid 1 on the motor unit 2 so that the

arrow ▼ on the lid 1 points towards the

symbol on the motor unit 2. Close the lid 1 by

turning it clockwise until the arrow▼ points to

the symbol. The lid1 clicks into place.

4) Press and hold the switch 3 until the coﬀee

beans have been ground to your requirements

(around 30 seconds).

NOTE

► If, during grinding, coﬀee starts collecting on

the edge of the appliance where it is out of

the reach of the blade 4, shake the

appliance gently so that the coﬀee falls back

inside.

The coﬀee grinding grade is inﬂuenced by the

quantity of coﬀee beans added and the duration

of grinding.

The longer you grind the coﬀee, the ﬁner the result.

Shorter grinding results in coarser ground coﬀee.

Grinding

grade

Recommended

quantity of

coﬀee

beans

Time in

seconds

Coarse 70 g (approx. 8 tbsp.) 30 s

Medium 45 g (approx. 5 tbsp.) 35 s

Fine 36 g (approx. 4 tbsp.) 45 s

These are rough guide values.

NOTE

► Please note the information about the grinding

grade in the operating manual of your coﬀee

machine.

5) Release the switch 3 once the coﬀee beans

have been ground to your requirements and

wait until the blade 4 has come to a standstill.

6) Unscrew the lid 1 until the arrow ▼ on the

lid1 points towards the symbol on the

motor unit 2 and remove it.

7) Remove the plug from the mains power socket.

You can now remove the ground coﬀee using a

spoon or similar. You can clear out any residue

using the cleaning brush 6.

NOTE

► No user action is required to switch the product between 50 and

60Hz. The product adapts automatically to either 50 or 60 Hz.

IB_353473_SKMS150A1_LB8.indb 5 26.10.2020 15:54:35

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 353473 SKMS 150 A1 in the language / languages: English, German, Dutch, Danish, French, Polish, Swedish, Spanish as an attachment in your email.

The manual is 0,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 353473 SKMS 150 A1 Manual

Product: