749712

Silvercrest IAN 349711 SKMP 1300 D3 Manual

47
Zoom out
Zoom in
Previous page
1/188
Next page
45
GB
11.1 Cleaning the base unit
1. Clean the base unit17 with a damp
cloth. You can also use a little detergent.
2. Wipe with a clean cloth with clear wa-
ter.
3. Do not use the base unit
17
until it has
completely dried.
11.2 Cleaning in the
dishwasher
The following parts are dishwasher-safe:
- Mixing bowl16
- Blender jug5
- Blade assembly7
- Seal for blade assembly6
-Lid2 of the blender jug
-Seal4
- Lid of the refill opening1
- Dough hook22
-Whisk21
- Beater20
- Splash guard18
The following parts must never be cleaned
in a dishwasher:
- Base unit17
-Cover8
NOTE: before cleaning the blender jug5 in
the dishwasher, always remove the blade
assembly7. Before every cleaning, re-
move the sealing6 from the blade assem-
bly7 (see “Using and removing the blade
assembly” on page 39).
11.3 Cleaning the accessories
1. Rinse the blender jug5 or the mixing
bowl16 with warm water and pour
away the water.
2. Remove the seal4 from the lid2 for
cleaning.
3. Clean all accessories by hand in a sink
with dishwater or in the dishwasher.
4. When cleaning by hand, rinse all parts
with clean water.
5. Allow all parts to dry completely before
reassembling, putting them away or re-
using them.
11.4 Cleaning the blender jug
1. Place the blender jug5 onto the base
unit17.
2. Fill it approximately half-full with warm
water containing detergent.
3. Put on the lid2.
4. Check that the speed control12 is set
to 0.
5. Plug the mains plug14 into a suitable
wall socket.
6. Set the speed control12 to 1.
7. Press the Turbo button13 briefly sever-
al times.
8. Set the speed control12 to 0 to switch
the device off.
9. Pull out the mains plug14 before clean-
ing the device.
10.Remove the blender jug5 from the base
unit17.
11.Pour out the dishwater.
12.Rinse the blender jug5 under clear wa-
ter.
13.Allow the blender jug5 to dry com-
pletely before you use it again.
11.5 Storage
• Allow all parts to dry completely before
placing them in storage.
• Store the device so that it is protected
against dust and dirt and out of the
reach of children.
•Figure B: you can wind up the power
cable in the cable spool24 on the un-
derside of the base unit17.
__349710_711_Kuechenmaschine_B8.book Seite 45 Mittwoch, 20. Mai 2020 2:06 14
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 349711 SKMP 1300 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 349711 SKMP 1300 D3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info