749712
36
Zoom out
Zoom in
Previous page
1/188
Next page
34 GB
~Always ensure that the speed control is
set to 0 before you plug the mains plug
into the wall socket.
~
Switch the device off and pull out the
mains plug from the wall socket before
you exchange auxiliary or additional
equipment moving in operation.
~
When the blender jug is not attached, the
cover must be mounted. Otherwise the
device will not work, in order to avoid in-
juries.
WARNING! Risk of material
damage
~Place the device exclusively on a level,
dry, non-slip and waterproof surface, so
that it can neither fall nor slip off.
~The mixing mechanism must not be op-
erated continuously for longer than
10 minutes, or the blender for longer
than 3 minutes. You must then allow the
device to cool down to room tempera-
ture.
~The device must never be operated with-
out the jug.
~Never place the device on a hot sur-
face, e.g. a hot plate.
~Do not change the position of the de-
vice, as long as there is still food or
dough in the device.
~Never overfill the blender jug or mixing
bowl, since otherwise the contents could
be ejected. Overflowing liquid would
flow onto the surface. You should there-
fore place the device on a waterproof
surface.
~Do not operate the device when it is
empty, as this causes the motor to over-
heat and may result in it becoming dam-
aged.
~Never fill the blender jug with hot or
boiling material.
~
Only use the original accessories.
~Do not use any astringent or abrasive
cleaning agents.
~The beater and dough hook have a non-
stick coating. Do not damage them with
sharp, pointed or scratching objects
(e.g. knife, pot sponge).
~The device is equipped with non-slip
plastic suction feet. As furniture is coat-
ed with a wide array of varnishes and
plastics and is also treated with different
care products, it cannot be fully ruled
out that some of these materials contain
ingredients that could attack and soften
the non-slip plastic suction feet. If neces-
sary, place a non-slip mat under the de-
vice.
4. Items supplied
1 professional food processor, base
unit17
1 splash guard18
1 mixing bowl16
1blender jug5 with:
-lid2 and
- lid of the refill opening1
- blade assembly7
-seal6
1 dough hook22
1whisk21
1 beater20
1 copy of the user instructions
__349710_711_Kuechenmaschine_B8.book Seite 34 Mittwoch, 20. Mai 2020 2:06 14
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 349711 SKMP 1300 D3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 349711 SKMP 1300 D3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 6,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info