749521

Silvercrest IAN 346706 SSE 6 D2 Manual

20
Zoom out
Zoom in
Previous page
1/69
Next page
20 GB/IE
Note: The soap dispensing also stops
as soon as you withdraw your hand. This
is true even if the programmed quantity
has not yet been dispensed.
If you do not intend to use the product
for long periods, press the “-” button 11
repeatedly until “OFF” appears in the
display 9.
Press the “+” button 10 to turn the product
back on.
Note: If you need to remove a large
quantity of soap from the soap tank, you
can let the soap dispensing run for 30
seconds: Press the „+“ button 10 and
the „-“ button 11 simultaneously and
hold them for about three seconds. The
product begins dispensing soap and stops
after 30 seconds.
Note: If you have not used the product
for several days, you may have to activate
the soap dispensing function several
times in a row before soap is dispensed
again.
Cleaning and maintenance
The LED 6 cannot be replaced.
Turn off the product by pressing the “-”
button 11 repeatedly until “OFF” appears
in the display 9.
Wipe the product with a damp cloth. If re-
quired, use a mild detergent on the cloth.
If one of the sensors 5 / 7 is dirty,
clean it carefully with a damp cloth.
Troubleshooting
= Problem
= Cause
= Remedy
The soap is dispensed slower than
usual from the soap outlet 8 or
the product does not work.
The batteries are too weak.
Replace the batteries (see “Inserting /
replacing the batteries”)
Water has entered the battery compart-
ment 4.
Allow the battery compartment 4 to
dry completely. Insert new batteries (see
“Inserting/replacing the batteries”).
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
b
a
Observe the marking of the
packaging materials for waste
separation, which are marked
with abbreviations (a) and num-
bers (b) with following meaning:
1–7: plastics / 20–22: paper and
fibreboard / 80–98: composite
materials.
The product and packaging mate-
rials are recyclable, dispose of it
separately for better waste treat-
ment. The Triman logo is valid in
France only.
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 346706 SSE 6 D2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 346706 SSE 6 D2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info