749459

Silvercrest IAN 345239 STEC 920 A1 Manual

27
Zoom out
Zoom in
Previous page
1/106
Next page
■ 24 │ GB│IE STEC 920 A1
1) After setting the desired browning level, insert the bread into the toaster
slots 7.
2) Press the operating button 8 downwards.
3) Press the button “Defrosting” 5. The integrated control lamp glows.
4) When the defrosting and toasting process is finished, the toaster switches itself
off automatically, the control lamp integrated in the button “Defrosting” 5
goes out and the bread slices are ejected to the top.
NOTE
► Press the "Defrost" button 5 again to switch off the defrost function.
The integrated control lamp goes out and the defrost process switches to
a normal toasting process.
► To stop the toasting process completely, press the “Stop” button 3.
The toaster switches itself off and the bread slices are ejected upwards.
Crisping bread rolls
Never lay bread rolls directly onto the toaster, always use the bread roll rack 6.
1) Fold out the two feet of the bread roll rack 6.
2) Place the bread roll rack 6 onto the appliance so that the feet protrude into
the toasting slots 7 and the bar between the toasting slots 7 fits into the
arched sections on the feet. In this position, the bread roll rack 6 sits on the
appliance stably.
3) Place the bread rolls onto the rack and start the toasting procedure. Turn the
toasting dial 2 up to level 2 , at most. The actual level of browning can
vary depending on the composition and type of bread roll.
NOTE
► After toasting, the rolls will be very hot.
4) As soon as the toaster switches itself off, turn the rolls over to crisp the other
side and then switch the toaster back on.
5) When you are finished with the bread roll rack 6, you can fold it for
space-saving storage:
–Wait until the bread roll rack 6 has cooled down.
–Remove it from the appliance.
–Fold the feet of the bread roll rack 6 back in.
IB_345239_STEC920A1_LB8.indb 24 31.07.2020 13:40:21
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 345239 STEC 920 A1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 345239 STEC 920 A1 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info