This user manual generally describes using the remote control.
Some basic functions (on/standby, source selection and volume setting) can also be adjusted directly from the sound bar.
The sound bar switches to standby if…
…no Bluetooth connection is established within 10 minutes or if no audio signal is received over the existing Bluetooth connection.
... no audio signal or only a weak audio signal is received for 20 minutes and no buttons are pressed.
In HDMI(ARC) and OPTICAL modes, please note:
If your audio source supports multi-channel playback, you need to switch it to “PCM Stereo” before getting started, as the sound bar will
otherwise be unable to output sound. Please refer to the user manual for your audio source.
9.1 Switching on the sound bar
Plug the mains plug of the sound bar into an easily accessible mains socket. The sound bar has no separate main switch, it goes straight into standby mode
immediately it is plugged in. The LED display (1) shows “- -”. Press the Standby button (2, 35) to wake the sound bar up from standby mode.
9.2 Switching the sound bar off
Press the Standby button (35) to switch the sound bar into standby mode. Alternatively, you can press the Standby button (2) on the sound bar for about
1 second. The sound bar has no separate main switch. Please remember that the power adapter consumes a small amount of electricity when the mains plug is
connected to the mains socket, even in standby mode. To disconnect it completely, unplug the mains plug from the mains socket.
9.3 Selecting a mode
Press the relevant button (13, 14, 15, 33, 34) to select the mode you want. Alternatively, you can toggle through the modes by briefly pressing the (2) button on
the sound bar several times. The mode selected is shown as follows on the LED display (1):
ModeDisplay
HDMI ARC Hd
OPTICALOPtI
BLUETOOTH®bt
USBUSB
AUXAUX
Now start playback on the connected device and control using the remote control. See the user manual for the playback device.
9.3.1 “HDMI ARC” mode
HDMI (ARC Audio Return Channel) is an extension to the conventional HDMI connection which allows ARC channel audio signals to be
transmitted in both directions. In order to use this functionality, all the components used must be ARC-compliant.
Most modern TV sets, games consoles and digital receivers have an ARC output. Please refer to the user manual for the device to be connected.
If the audio transmission does not work, make sure that the HDMI cable and the connection on the source device are ARC-compliant. It is
possible that only specific connections on the source device are ARC-compliant.
How to connect the sound bar to a TV set is described below:
•Using an HDMI(ARC)-compliant cable (C, supplied), connect the HDMI(ARC) jack (9) on the sound bar to an HDMI(ARC) output on the TV set. Set the
connected device to “PCM Stereo” or “Stereo 2.0”.
•Switch the sound bar on using the Standby button (2, 35).
•Press the “HDMI (ARC)” button (13) to select the HDMI(ARC) input on the sound bar.
•Switch the TV set on, the sound playback will start within a few seconds.
If your TV set supports the CEC protocol, the sound bar can be switched on and off using the TV remote control. If this is the case, the volume
can also be controlled via the TV remote control. See the user manual for the TV set.
9.3.2 “OPTICAL” mode
Use this operating mode to play music from the optical digital input (10) for example from a TV on your sound bar (A). The TV must have an optical digital output.
Use the optical cable supplied (Toslink cable) to make the connection. Proceed as follows:
•Connect the Toslink cable (D) to the optical digital output of your TV.
•Then connect the Toslink cable (D) to the optical digital input (10) of your sound bar.
•Switch the TV set and sound bar on. Set the connected TV to “PCM Stereo” or “Stereo 2.0”.
•Start playing on the TV.
•Press the “OPTICAL” button (14) on the remote control to select this mode.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Silvercrest IAN 339458 SSB 70C3 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Silvercrest IAN 339458 SSB 70C3 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.
The manual is 2,52 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
