Manual Silvercrest IAN 338924 SKMC 1200 C3 (page 34 of 40) (English)

750504

Zoom out

Zoom in

1/40

34 GB

17.9 Change menu language

If desired, you can change the language for the menus.

1. Tap the button on the screen.

2. If required, tap .

3. Slide the menu up with one finger and then press the

CHANGE field in the Language row.

4. Tap the field of the desired language and confirm the

selection.

The screen goes dark and then appears after a few

seconds with the new languages.

18. Cleaning and servicing the

device

DANGER! Risk of electric shock!

~Disconnect the mains plug16 from the mains socket

before any cleaning.

~Never immerse the base unit14 in water.

DANGER! Risk of injury from cutting!

~Please remember that the blades of the blade assem-

bly19 are very sharp. Never touch the blades with

your bare hands in order to avoid cuts.

~Before removing the blade assembly19, rinse the

blender jug5 with water and remove scraps of food

from the blades so that the blade assembly19 can be

removed safely.

~When washing manually, the water should be suffi-

ciently clear so that you can see the blade assem-

bly19 easily to avoid injuries caused by the very

sharp blades.

CAUTION:

~Never use any abrasive, corrosive or scouring clean-

ing agents. These might damage the device.

NOTE: certain foods or spices (e.g. curry) may discolour

the plastic. This is not a device error and is harmless to

health.

18.1 Cleaning the base unit

1. Clean the base unit14 with a damp cloth. You can

also use a little washing-up liquid.

2. Then wipe off with a clean, moist, light cloth with

clean water.

3. Do not use the base unit14 until it is completely dry

again.

4. The screen can also be cleaned with a lens cleaning

cloth or special cleaning agents for monitors.

18.2 Cleaning in the dishwasher

The following parts are dishwasher-safe:

-Blender jug5

-Measuring beaker25

- Lid for blender jug24

- Seal for blender jug23

- Blade assembly19

- Seal for blade assembly18

-Cooking pot20

- Mixer attachment21

- Spatula22

- Steamer attachment, deep3

- Seal for the steamer attachment4

- Steamer attachment, shallow2

- Lid for the steamer attachments1

The following parts must never be cleaned in a dishwasher:

-Base unit14

NOTE: before cleaning the blender jug5 in the dishwash-

er, always remove the blade assembly19.

18.3 Cleaning the accessories

1. Rinse the blender jug5 with warm water and dump

the water.

2. Remove the blade assembly19 (see “Using and re-

moving the blade assembly” on page 15) and take

the seal18 off (see “Cleaning, checking and replac-

ing seals” on page 34).

3. Clean all accessories by hand in a sink with dishwa-

ter or in the dishwasher.

4. When cleaning by hand, rinse all parts with clean

water.

5. Allow the parts to dry completely before using them

again.

6. Before using the device again, reinsert the blade as-

sembly19 in the blender jug5.

18.4 Cleaning, checking and

replacing seals

Remove seals18,23 and4 for cleaning and check them

for damage. Pay attention to changes (e.g. porous materi-

al or tears).

- The removed seals18,23 and4 can be cleaned in

the dishwasher.

- Damaged seals18,23 and4 must be replaced with

new ones. You can reorder new seals (see “How to or-

der accessories” on page 38).

CAUTION:

~Prior to the next use, damaged seals18,23 and4

must be inserted again or replaced with new ones. An

operation without seals18,23 and4 in place is not

permitted.

__338924_1907_MC-Connect_GB_online.book Seite 34 Donnerstag, 12. Dezember 2019 10:09 10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 338924 SKMC 1200 C3 in the language / languages: English as an attachment in your email.

The manual is 3,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Silvercrest IAN 338924 SKMC 1200 C3

Silvercrest IAN 338924 SKMC 1200 C3 User Manual - German - 43 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 338924 SKMC 1200 C3 Manual

Product: