750352
36
Zoom out
Zoom in
Previous page
1/170
Next page
GBIE 33
SFW 350 D4
7) Replace the pattern strips back in to the front of the biscuit attachment .
Ensure that the grip on the pattern strips points away from the appliance.
If it does not, you will not be able to adjust the pattern, which is located
directly on the grip.
8) Assemble the meat grinder casing as described under “Assembling the
meat grinder”.
9) To dismantle it, you must first remove the pattern strips before you can
screw the ring clamp 0 open and take the biscuit attachment back out.
Fitting the strainer attachment
Unfold the fold-out page – it contains the step-by-step illustrations for assembling
the appliance.
1) Remove the meat grinder casing as described in “Assembling the meat
grinder”.
2) Remove any attachments that might be fitted and clean the meat grinder
casing .
NOTE
The transport screw - and the cross blade ! with the spring 3 are not
required for the strainer attachment! Remove these from the meat grinder
casing if necessary.
3) Push the plastic screw into the meat grinder casing .
4) Push the strainer sieve over the plastic screw so that the tabs on the
strainer sieve fit into the recesses in the meat grinder casing . The holes
of the strainer sieve should be facing downwards.
5) Once everything has been correctly attached, roll the ring clamp 0 over the
strainer sieve and screw it on hand-tight.
6) Fit the meat grinder casing as described in “Assembling the meat grinder”.
7) Undo the locking clamp on the tomato outlet .
8) Place the tomato outlet under the strainer sieve by pushing the tip of the
strainer sieve through the small hole in the tomato outlet :
36


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 338774 SFW 350 D4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 338774 SFW 350 D4 in the language / languages: English, German, Dutch, French, Polish, Swedish as an attachment in your email.

The manual is 1,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info