Manual Silvercrest IAN 338569 SPO 55 (page 77 of 337) (English, German, Dutch, French, Polish)

749517

Zoom out

Zoom in

1/337

77 GB/IE

The memory of the pulse oximeter has over

100 storage slots. If these are all full, the

oldest value will be overwritten.

To reset the device to its factory settings,

proceed as follows:

1. Remove one of the two batteries inserted

into the device.

2. Press and hold the function button 2

and reinsert the battery.

3. After inserting the battery, hold down

the function button 2 for a further 5

seconds. If you have successfully

followed the instructions, “RESET “ will

appear in the display.

Measurements

Slide one ﬁnger into the ﬁnger opening 3

on the pulse oximeter. Hold the ﬁnger still

(Fig. F).

Press the function button 2. The pulse oxi-

meter will now begin the measurement. Do

not move during measurement (Fig. G).

After a few seconds the display 1 will show

your measurements (Fig. H).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 338569 SPO 55 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 1,96 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Silvercrest IAN 338569 SPO 55 Manual

Product: