749738

Silvercrest IAN 338202 SEK 2000 B2 Manual

23
Zoom out
Zoom in
Previous page
1/88
Next page
GB/IE24
There are 3 matching holes in each corner of the
device. Now take the stand
5
with the screws
4
and place it exactly over the matching holes.
When the screws 4 are inserted in the correct
holes, tighten them with a screwdriver (Fig. 3).
3
Please proceed in the same way with all four
stands 5 until they have all been assembled.
The device can now be placed on its stands 5.
The device is ready for start-up (Fig. 4).
4
Starting-up
Please find a suitable location for the device before
starting it up.
For safe and trouble-free running of the device,
choose an installation location which meets the fol-
lowing requirements:
– The floor should be firm, flat and horizontal.
– The device should be set up at least one metre
away from furniture, curtains and other easily flam-
mable objects.
– Do not place the device in a hot, wet or very humid
environment
– A grounded socket protected by a residual-current
device with overload protection should be availa-
ble in the vicinity of the device.
– The power socket should be easily accessible so
that the mains connection cable can be easily dis-
connected, if necessary.
– Extension cords are prohibited.
Plug the device cable into the earthed power
socket.
IMPORTANT! The cable must remain on the rear-
side of the device and must not come into contact
with any hot elements.
Device operation
The device is operated via the operation panel
2
and the thermostat
3
on the right-hand side (Fig. 5).
The first switch with the [ ] symbol switches
the flame effect on and off. The flame effect can
be used with or without the heating function. If
the switch is set to the [ O ] symbol, the flame
effect is switched off. If you press the switch to the
left [‒], you will activate the device.
For a low amount of heating, switch the first heat-
ing level with the [ I ] symbol to the [‒] symbol
to turn it on and to the [ O ] symbol to turn it off.
Please note that the heating function cannot be
used without the flame effect.
… 23 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Silvercrest IAN 338202 SEK 2000 B2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Silvercrest IAN 338202 SEK 2000 B2 in the language / languages: English, German, Dutch, French, Polish as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info